#1
|
||||
|
||||
project ZENITH
SOME MAY HAVE SEEN THIS BUT IV JUST DECIDED TO RESTART IT SO
HERE ARE THE PICS FROM THEN TILL NOW THE CLEAR CHASSIS IS JUST FOR MOCK-UP IM MAKING A CUSTOM ALLOY ONE the chassis r32 veilside combat 1st coat of primmer first top coat 2 more top coats + 3 laquer and decals 4 MONTHS LATER !!! time for a resurection -------------------------------------------------------------------------------- ok this project has been sat on the workshop shelf for so long now after fitting the 2x3 stacked board i fired her up on the dyno got to around 66mph shot the tyres off and i nearly lost and eye !!! so then it was time to try her on the road a few hot laps later and i fried the board the car was put on a shelf and thats where we are at now new plans are to go hobby grade watch this space updates and teaser pics to come very shortly EDIT the heart of it all here she is done and done full gpm micro-t board and servo custom extra long alloy chassis custom front and rear clips 2 cell "EVO" li-po handwound arm in bb can custom tyres on alloy rims custom titanium centre shaft
__________________
TEAM XI I AINT NAMED REAPER COZ I CUDDLE BUNNYS ! XMS and XMF february COTM winner Last edited by reaper; 12-03-2008 at 02:34 PM.. Reason: more pics |
#14
|
||||
|
||||
as it was a one off the chassis (front and rear) were done by hand as it was a lot less work than setting up the machine just to do one
the electronics are plasmatomic motor 2.4ghz RX 9g micro servo and a forward only ESC
__________________
TEAM XI I AINT NAMED REAPER COZ I CUDDLE BUNNYS ! XMS and XMF february COTM winner |
#16
|
||||
|
||||
just a small tip that 2.4ghz receiver can and most likely will be disrupted by a normal cordless house phone, ive seen it happen in a nitro truck where it turned into a runaway because of the 2.4ghz
__________________
CANADA 14 GOLD MEDALS BABY! silly americans hockey is for canadians! |
#17
|
||||
|
||||
Quote:
i didnt use a dremel as that would put to much heat into it i just drilled and then shaped with a file the gave it all a **** good polish @stang_racer raely i dint know that i always herd that the 2.4ghz was so manufactured to block any sort of interference iv not had any from any of my phones but thanks for the tip
__________________
TEAM XI I AINT NAMED REAPER COZ I CUDDLE BUNNYS ! XMS and XMF february COTM winner |
#18
|
||||
|
||||
I'm pretty sure that when reciever recieves (lol) interference, it hops to a different frequency...
Later, RedSXmodder |
#19
|
||||
|
||||
all i know it that it some times happens with the spektrum radios, also if they go outta sight the spektrums seem to just stop lol, knowing this from doing hill climbs with my savages and seeing other people have to go get their trucks when their not stuck lol
__________________
CANADA 14 GOLD MEDALS BABY! silly americans hockey is for canadians! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|