Project MegaStock

[SlickEVO]

Hey all, I'm thinking of starting a new project, which I will call MegaStock. Basically, the goal is to upgrade everything to its full possible potential while retaining the stock look of the chassis. This includes, but is not limited to:

A hand-wound 21T spiral armature
A pair of Neodymium magnets
a stock-looking ball-bearing endbell
and carbon brushes
all in a stage one can

Upgraded FET's stacked as high as I can without hitting the PCB cover.

18AWG motor wires (keep the stock screw-in type tabs.)

JDR's AAA lith system, utilizing the stock switch.

That's all I can think of, I am certainly open to suggestions. In fact, I really want suggestions!

Peace.

[color0]

i'd rather you hide a nelly under the receiver or something, a 2x2 stack is not going to support a 21T motor safely.

[SlickEVO]

^Would that fit in there?

[xmodalloy]

If your keeping it rwd hide it in the front.

[color0]

Originally Posted by SlickEVO

^Would that fit in there?

not easily. if you're going to stick to a 2x2, the lowest you probably should go is 28t.

[skyline-rsx392]

Originally Posted by color0

not easily. if you're going to stick to a 2x2, the lowest you probably should go is 28t.

i agree with color0, if ur gonna do a 21t armature go with a nelly 2 keep it safe. and then its gonna be risky running it without a fan or ventilation holes in the can so find a small fan and drill a hole in the bottom of the can if u want it to look stock.