#1
|
||||
|
||||
Would this board work?
My TC fets just fried and I'm thinking about upgrading and going "hobbygrade". I was looking through here and saw people mentioning micro-t boards and motors but wasn't sure what to get.
I found this and was just wondering if it would work and what else I would need to get with it. http://cgi.ebay.com/Losi-LOSB9595-Xc...item519617a19b
__________________
Road Course '08 GT-R Rally Scion TC (off road mods in progress) Sharing EVO chassis for now. |
#2
|
||||
|
||||
that board can be used but you will also need the rx made for it and fid a way of fitting the brushless motor into your xmod
a better way is to use a stock losi micro board , that way you can still use your normal xmod motor
__________________
TEAM XI I AINT NAMED REAPER COZ I CUDDLE BUNNYS ! XMS and XMF february COTM winner |
#3
|
||||
|
||||
So if I got that board I would also need this then?
http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT Is there any place that sells the stock board or any places that sell the evo boards? I've tried google and ebay and some of the rc hobby part sites.
__________________
Road Course '08 GT-R Rally Scion TC (off road mods in progress) Sharing EVO chassis for now. |
#4
|
||||
|
||||
thats the board you want , it has the reciver and speed controle on one board just like an xmod
but it is much better than an xmod board dont forget you will also nee a hobby grade 27mhz transmitter
__________________
TEAM XI I AINT NAMED REAPER COZ I CUDDLE BUNNYS ! XMS and XMF february COTM winner |
#5
|
||||
|
||||
Thanks for the help, though if I didn't want to spend the money could I just buy the AtomicMods FETS upgrade for the evo and be fine.
Edit: would I need anything else to go with the board, like a servo for steering?
__________________
Road Course '08 GT-R Rally Scion TC (off road mods in progress) Sharing EVO chassis for now. Last edited by IHateMakingUserNames; 11-20-2010 at 04:30 PM.. |
#6
|
||||
|
||||
yep you could do that or the atomic v2 board is easy to install and will let you run much faster motor
just keep an eye on those capacitors
__________________
TEAM XI I AINT NAMED REAPER COZ I CUDDLE BUNNYS ! XMS and XMF february COTM winner |
#7
|
||||
|
||||
Alright the only thing I'm a little hesitant about is the V2 board says it outputs higher power and can overheat motors, is that just because of the power cells or batteries being used, cause I use a set of Duracell 1000mah rechargeables 1.2v each and they put out some serious power. I can run my GT-R with stage 2 motor and lights a good thirty minutes without any loss of power.
__________________
Road Course '08 GT-R Rally Scion TC (off road mods in progress) Sharing EVO chassis for now. |
#8
|
||||
|
||||
Quote:
__________________
Toyota, Moving Forward. Even if you push the breaks. |
#9
|
||||
|
||||
Thanks, I think I'm going to replace the FETs and possibly do a 2x2 stack, at some point I might get the V2 board to run a faster motor.
__________________
Road Course '08 GT-R Rally Scion TC (off road mods in progress) Sharing EVO chassis for now. |
#10
|
||||
|
||||
You may also consider getting your board worked on by one of the service providers on this forum .
__________________
XMS Approved Service Provider I install FETs and do repairs on Xmods and Mini-Zs including the new 2.4Ghz ASF boards and MR-03s. |
#11
|
||||
|
||||
Quote:
I won't learn much. So basically if I bought the FETs or V2 board you or somebody else could assemble it for me, or would you replace the FETs if I just sent the board.
__________________
Road Course '08 GT-R Rally Scion TC (off road mods in progress) Sharing EVO chassis for now. |
#12
|
||||
|
||||
Quote:
Hey if you want to give it a shot I'd be happy to help with some pointers. Its good if you want to learn and feel up to trying on your board but a lot of people prefer just having someone experienced do it for them. Neither way is wrong. I am just here so that if you decide to have someone else do the work it will be very affordable. FETs are included with my service. $10 a stack FETs included. If you want to provide your own supplies like FETs or V2 board then that can be arranged too.
__________________
XMS Approved Service Provider I install FETs and do repairs on Xmods and Mini-Zs including the new 2.4Ghz ASF boards and MR-03s. Last edited by Action B; 11-21-2010 at 03:06 AM.. |
#13
|
||||
|
||||
Quote:
__________________
Road Course '08 GT-R Rally Scion TC (off road mods in progress) Sharing EVO chassis for now. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|