April/May 2008 -- "Open Class" Entry Thread:

[Donziikid]

Welcome to one of the largest competitions to have ever hit Xmodsource.com! Since our dear friend ZX9RBART has decided to donate a paypal/money transfer of $100, this competition will be something special. It will be a two month competition with some different rules.

Make sure to read all of the rules; anyone caught not following a rule will be instantly withdrawn from the competition as well as be given infraction points.

Rules:
1. Members are required to have been a member of Xmodsource.com one month prior to the announcement of this competition.
2. Members are required to have a submission containing six pictures of their Xmod. One of these pictures has to be a chassis picture, the other five can be whatever you want. Remember, that is a six picture maximum and minimum!
3. All members are limited to one submission.
4. Your submission must be modified in some way other than using RadioShack upgrades. A list of upgrades is required during submission.

Voting:
1. A voting thread will be created on the 28th of May and the voting thread will be closed on the 2nd of June. Entries must be in by the 28th of May at 9:00PM EST.
2. Voting is open to all members but will be watched very, very closely. Any member caught cheating during voting will be instantly eliminated and banned from the forum.
3. It is encouraged for members to vote for someone other than themselves.


Custom Chassis’:
Custom chassis’ are allowed as long as they are Xmods based. Your custom chassis must be based solely on the Xmods line; you may not use any chassis parts from other manufactures (with the exception of rims/tires/wheels). However, you are allowed to use electronics from other manufactures (like Kyosho, iWaver and MicroT boards as well as hobby-grade servos).

As mentioned above, custom chassis' are allowed as long as they are Xmod based; chassis manufactures like CXP, AtomicMods and others are allowed.

Any questions you may have are to be asked in the Discussion Thread. Any questions asked here will be deleted as well as one infraction point will be given. This is the entry thread only, no discussion, please.

Thank you and good luck,
Xmodsource Moderating Staff.

[Donziikid]

Originally Posted by Donziikid

4. Your submission must be modified in some way other than using RadioShack upgrades. A list of upgrades is required during submission.

You have already broken a rule. Where is your list of upgrades? You have twenty four hours; if there isn't a list in that time your submission is to be pulled and infractions are to be given.

Consider this a warning to everyone, not just Fordman.

Cheers,
Kyle.

[Donziikid]

Update on the rules due to Database Error. If you have any questions about the updated rules, ask them in the Discussion Thread.

Cheers,
Xmodsource Moderating Staff.

[123Vette]

video
(not to is fulliest potentially it was starting to rain when i made this so i did a short fast video as to not ruin my camera or truck lol) better video when its nicer out and i have a camera man

http://s208.photobucket.com/albums/b...t=GEDC0124.flv

radioshack awd
locked diffs
lipo
hobby grade electronics
hobby grade reciver and controller
atomicmods fatboy motor
custom installed hobby grade servo steering
all on a x-truck chassie with f150 body and body kit

this thing can pull wheel stands from a dead stop and carry on for like almost 20-30 feet
it aint pretty by any means but its one hell of a fast truck

[CUSTOM]

I decided to enter my red f-150 x-truck. It has a new paintjob, MzR Tracker overland tires, and my own gear reduction. Not much, but this one was made to look and drive like the real thing.






Upgrades:
-RS 4wd kit
-RS Lift kit
-RS F-150 Blue body kit
-Custom paintjob
-Custom gear reduction
-Mini-z Racer Overland Tracker tires
-Gen1 RSX rims (fit snug enough that I don't need locknuts)
Yup... thats it!

[bestdragon2001]

My custom RSX





Custom Exhaust

Upgrades
-mild bk
-drift wheels
-AWD
-purple/blue/red color change paintjob
-yellow front springs
-blue monoshock rear
-cf driveshaft
-cf decks
-yellow stage 2
-soon to have neons

[blue504life]

heres my parrnelli jones mustang








only mods are
custom body
painted wheels
extended chassis

if i dont qualify feel free to remove it from the comp

[Lancer_Man]

http://i268.photobucket.com/albums/j...g/IMG_4777.jpg
http://i268.photobucket.com/albums/j...g/IMG_4778.jpg
http://i268.photobucket.com/albums/j...g/IMG_4781.jpg

Paint.

With neon.

That's it.

[adamcrawls]

Chevy Safari Pickup













Specs:

Stage 2 w/neos

Custom Tires

Custom Body and Clip

all custom acesories

articylation mod

custom canvas bed

O and RS 4WD

Thats it!

[drofants]

Upgrades:
rs awd
sb hybrid s2 motor
rs berrings
full gpm upgrades (blue frame with silver driveline)
custom paint (green/blue/purple flip... camera can't capture the flip... )
roof scoop / mesh grills
aluminum wheels

[suicide_star]

Operation: Destroyer








Specs:
Body:
Saleen S7 Iwaver body (Metallic Blue)
Wheels:
GPM Aluminum 5 Star wheels w/ XI blue lock nuts
Chassis: Atomic Mods Stiletto chassis
Motor: Atomic T2 High Current
Battery: Li-ion
Fet Setup: V3 board
Hot Racing:
F & R knuckles
F & R axles
F & R Lower control arms
F & R Upper shock towers
Rear skid plate
Motor head sink
R Dog bones
GPM:
Motor Cradle
Front gear box cover
Rear gear box cover

[snowboi1289]

My Custom blue F-150.

Heres my favorite xmod I have.
Overview

Front

Side

Rear


Chassis


Upgrades:
Electrolytic capacitor (for motor cruise).
Articulation modification.
Chain for roll cage.
Lift Kit.
Slammed rims.
Black hood w/ hood scoop.
Torque gearing.
Bodykit upgrade.
Bearing upgrade.
Stage #2 motor arm w/ stage #1 motor case,magnets,and brushes.
Trailor hitch.
4WD upgrade.
Lifted body.
Spring upgrades.


Thanks,
snowboi.

[noturday]

well i just got new tires for it today and i figured eh..why not enter it...so here's my entry








Mods:
-custom avalanche body painted black and fitted with many mods like front tow hooks, side mirrors, step rails, rear tow hitch. and the new front powerbar
-Radline stock motor with 8-25 gearing
-RS 4wd
-RS Lift Kit
-RS suspension kit with bump-steer correction mod in the front
-RS bearings
-Chassis painted flat black
-command logic light kit
-custom model wheels (by XMODification)
-super-swamper tires

[XMDrifter]

Here's my GTR:
font shot:

back shot:

side shot:

shell wiring shot:

chassis shot:

body by itself with my paper bodyshell on the same chassis


upgrades list:
42t EGR Ball Bearing motor
18 AWG wiring for batts and motor
V2.2 board
custom painted chassis parts
custom suspension travel increase
foam tires on drift rims(painted white)
custom antenna tube muffler
custom light wiring
lowered body
painted body
blacked out headlights
painted remote
AWD
custom aluminum driveshaft
heatsink
sealed bearings
r22 resistor mod(transmitter-increased range)

this is probably the best picures of this car that you will ever see again

[bondo]

Phew, talk about last minute.....
for a second there i did'nt think i was going to get my car in in time but fortunately for me, one of my good freinds let me use his camera.

here's my superbird.
i've been building this car for over 2 years.
either i could'nt figure out what to do or i did'nt have the money to do what i needed.
if you really look the car over you will notice all kinds of obsticles that i had to think through.
the final product came out almost exactly like what i had envisioned 2 years ago.
i did want a bit of a different style on the chassis and i would have liked to paint in my logos but bart put up that prize and actually put a deadline infront of me behind it .
thanks for lighting the fire bart

anywhoo,
the car is a '69 plymouth Daytona "superbird".
custom SGK cut/painted(flat black) lith-ion chassis
XI/SGK li-ion
Atomic StockR motor
Revelle RPMz slicks
full rollcage interior w/homade nitrous bottle,window net and seat
full wired/hosed engine w/ homade braided nitrous hose and rail..........(@tex, their even wired in firing order)
detail master fuel cover
detail master functional hood pin kit(hinged rear for suicide hood)
homade ballast box for wheelies
custom painted RS heatsink
GPM:
mustang front clip
front/rear arms
front/rear shock mounts
front/rear shocks
front/rear knuckles
front/rear cups
rear dogbones
the thing that goes over the rear clip
ball differential/locked

The paint is HOK black diamond laid over HOK flat black with HOK red kandy.
44 individual decals were laid
gunmetal/flat black detailed rims(even painted the lugs)

you ready for the pics???........
........
........
........
........
you sure your ready????


lol












cheers,
Bondo

[SkysTheLimit]

STLCustoms 2009 Chevrolet Camaro (White)










Here is a link to a larger resolution image of the above:
http://i27.photobucket.com/albums/c1...Camaro9Big.jpg



List of Modifications:
-Supergloss white Camaro body with black stripes
-Angel eye headlights
-Neon license plate frame
-STLRacing Xmods Spinner Kit black 8-spoke style
-Retro-styled Chin spoiler for aerodynamics
-Painted Chassis components including:
--FlowPaint chassis, where all items flush to the top deck are painted white, and all items with a height above the top deck are painted high shine silver to create true depth paint
--Black painted arms
--Steel blue metallic shocks, suspension plates, tie rod and tie rod holder
-Gloss white controller
-Metal motor heatsink

[stangdude94]

My entry :

MiniZ Audi tt body
Custom body mount
Custom painted weels
Custom exaust tips
Custom green metalic paint
Lithium polimer
Custom rummer tires
Custom drive shaft
Locked diff in the rear
Red springs in the front blue in the rear
Race suspencion uppgrade kit
S2 8-25
Custom Front clip (Shaved to fit the mini z body)

Here are the pics

[2wdpancar]

Oh yeah, I got it to work, steering will be modified to be at its fullest after the comp is over.
I'm so happy I could get this thing to work!

Mods:
-Hs55
-Moped esc-rewired with deans and 18g wire
-gpm:
knuckles, cvds

-hot racing:
shock towers, heatsink
-17T motor(vented can, neo mags, carbon brushes-shreds!!)
-LiPo
-Custom painted body
-vxb sealed bearings
-custom bottom LiPo plate for easy access
-Futaba receiver- Futaba 2PL(tx)

[coolcar24th]

Heres my last xmod.

Peterbilt Xmod







chassis pic


Vid of speakers used:
http://s64.photobucket.com/albums/h1...t=IMG_0061.flv

Specs:
-custom dual rear axle drive
-custom painted body
-stage one xmods gen 1 motor with neo mags
-fabricated chassis parts to extend chassis
-headlights/taillights
-full decorated interior with driver
-reefer trailer with mounted speakers
-motor directly soldered to EP
-extended steering/batt wires
-GPM batt covers
-on/off switch relocated
-custom driveshaft
-bearings all around
-hidden antenna
-neon

Parts Used in the build:
-2 xmod truck chassis
-peterbilt model truck
-styrene
-4wd truck kit
-computer speakers
-GPM batt covers
-evo bearings kit
-custom motor
-mp3 player
-paint
-lights

[texan_idiot25]

Chassis picks later, mine is sorta pieced together into running conidition for pics... it's a mess of missing screwes and ****.










Non-theme rims...

The uninteresting chassis:

Mods:
Custom painted body, rims, custom "F-Bomb" waterslides (Thanks Surgeon) custom lip spoiler and the fat-n-skinny tires.

Freestylexmods's 47T motor with iso-mags, fat com, spiral arm.

Themed after Nelson Racing Engine's F-Bomb Camaro: http://nelsonracingengines.com/pix-rides-73fbomb.html