Go Back   XmodSource.com > Miscellaneous > Miscellaneous RC's
Register FAQ Members List Calendar Gallery iTrader Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 06-06-2010, 12:29 AM
momofx's Avatar
momofx momofx is offline
Advance member
 
Join Date: Mar 2010
Location: IL
Posts: 113
Trader Rating: (0)
Question My new Micro-DT suggestions...

I am new to the world of Losi Micro and just bought my Micro-DT. Here is a list of upgrades I want to do and some questions on them as well, which I would be most grateful if you guys could answer or suggest, etc and let me know if I am going along the right path with upgrading this. Do note that I will not be using it all the time since my main monster is a highly upgraded Savage Flux HP

Upgrades for Micro-DT
-----------------------

1. Bearings (already installed)
2. Threaded Axles (already installed)
3. Aluminum Shocks (already installed)

4. Losi 8750kV BL Motor (I want something that is "driveable" for indoors and occasional outdoor speed runs)
5. Losi 3 wire Servo
6. Castle Creations Sidewinder Micro ESC (unless you have a cheaper suggestion)
7. Stronger steering rods (found some on Ebay...)
8. 3Racing Gearbox


Thats it so far, any other suggestions you guys have - let me know. BTW, are the aluminum A-Arms really needed?

Thanks!
Reply With Quote
  #2  
Old 06-06-2010, 12:39 AM
mycrors4's Avatar
mycrors4 mycrors4 is offline
retired xmodder
 
Join Date: Jun 2009
Location: Los Angeles, California, USA
Posts: 1,177
Trader Rating: (4)
Send a message via AIM to mycrors4
Default

Quote:
Originally Posted by momofx View Post
I am new to the world of Losi Micro and just bought my Micro-DT. Here is a list of upgrades I want to do and some questions on them as well, which I would be most grateful if you guys could answer or suggest, etc and let me know if I am going along the right path with upgrading this. Do note that I will not be using it all the time since my main monster is a highly upgraded Savage Flux HP

Upgrades for Micro-DT
-----------------------

1. Bearings (already installed)
2. Threaded Axles (already installed)
3. Aluminum Shocks (already installed)

4. Losi 8750kV BL Motor (I want something that is "driveable" for indoors and occasional outdoor speed runs)
5. Losi 3 wire Servo
6. Castle Creations Sidewinder Micro ESC (unless you have a cheaper suggestion)
7. Stronger steering rods (found some on Ebay...)
8. 3Racing Gearbox


Thats it so far, any other suggestions you guys have - let me know. BTW, are the aluminum A-Arms really needed?

Thanks!
1: good
2: good
3: good
4: should be fine for normal indoor speeds IF you dont switch to lipo
5: good
6: use the losi esc provided with the BL combo http://www.horizonhobby.com/Products...rodID=LOSB9594
7: i say switch to turnbuckles (thetoyz is out of stock)
8: perfect

alloy a arms are not needed, but i say get a RPM front bumper, its worth it
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away

Check out my B/S/T Thread

Want remixes of some songs... PM me.. I has DJ programing software

Inventor of the idea of using Bob Saget to name R/C parts

٩(-̮̮̃•̃)۶

Last edited by mycrors4; 06-06-2010 at 12:48 AM..
Reply With Quote
  #3  
Old 06-06-2010, 12:43 AM
xmodzracer's Avatar
xmodzracer xmodzracer is offline
I got nothin...
 
Join Date: May 2007
Posts: 575
Trader Rating: (0)
Default

agreed with everything mycrors said. what are you using for tx/rx?
__________________

New Forum Needing Members:
http://rcunited.tk/
Reply With Quote
  #4  
Old 06-06-2010, 01:51 AM
taiwanesekid05's Avatar
taiwanesekid05 taiwanesekid05 is offline
That's what she said.
 
Join Date: May 2007
Location: Nor Cal
Posts: 1,819
Trader Rating: (1)
Default

I basically have the same set up (aside from the shocks, I kept mine stock). I'd say instead of buying the brushless system, go for a BB2 motor and Lipo. It gives good speed indoors and outdoors, is relatively low maintenance, and a whole lot cheaper. For the steering rods, use a guitar pick (I used one of my sister's old ones) since its cheap and lasts for a long time (the ones I made haven't broken yet, and its been about a year). And as for the metal gearbox, I never bought one and I personally don't know the benefits, so I'd personally skip that one since the stock gearbox is fine.
__________________
ಠ_ಠ
I see what you did there
Reply With Quote
  #5  
Old 06-06-2010, 02:30 AM
momofx's Avatar
momofx momofx is offline
Advance member
 
Join Date: Mar 2010
Location: IL
Posts: 113
Trader Rating: (0)
Smile

You guys are just GREAT! You know whats really sad? I joined SPECIFIC websites that cater for the mini-t, etc. (I will not mention names) and for almost 2 days got ZERO response. I try this site and instantly I get a response *****************THANKS GUYS******************

Btw, more to follow - currently workin on my Flux HP changin the diffs to Bulletproof - lots of fun...
Reply With Quote
  #6  
Old 06-06-2010, 11:57 AM
mycrors4's Avatar
mycrors4 mycrors4 is offline
retired xmodder
 
Join Date: Jun 2009
Location: Los Angeles, California, USA
Posts: 1,177
Trader Rating: (4)
Send a message via AIM to mycrors4
Default

Quote:
Originally Posted by taiwanesekid05 View Post
I basically have the same set up (aside from the shocks, I kept mine stock). I'd say instead of buying the brushless system, go for a BB2 motor and Lipo. It gives good speed indoors and outdoors, is relatively low maintenance, and a whole lot cheaper. For the steering rods, use a guitar pick (I used one of my sister's old ones) since its cheap and lasts for a long time (the ones I made haven't broken yet, and its been about a year). And as for the metal gearbox, I never bought one and I personally don't know the benefits, so I'd personally skip that one since the stock gearbox is fine.

guitar picks? O.o.. i just cut pieces from the xmod body kit box.. lol

the 3r tranny it a big upgrade
a) it uses bearings for the spur instead of bushings
b) the stock tranny is known to eat your gears over time
c) its worth saving the gears after time...
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away

Check out my B/S/T Thread

Want remixes of some songs... PM me.. I has DJ programing software

Inventor of the idea of using Bob Saget to name R/C parts

٩(-̮̮̃•̃)۶
Reply With Quote
  #7  
Old 06-06-2010, 10:57 PM
momofx's Avatar
momofx momofx is offline
Advance member
 
Join Date: Mar 2010
Location: IL
Posts: 113
Trader Rating: (0)
Default

Quote:
Originally Posted by xmodzracer View Post
agreed with everything mycrors said. what are you using for tx/rx?
Using my Spektrum DX2S and a micro receiver so I can have one receiver for both my Flux HP and this Also like the 4 x AA instead of 8 x AA in the radio

Thanks guys - yeah I decided to not go all out with it since I will not be using it all the time so I decided to just get the BL Motor Combo, Lipo and turnbuckles. Will post up some pics once its all together...

Last edited by DRFTKO; 06-07-2010 at 01:00 AM.. Reason: double post
Reply With Quote
  #8  
Old 06-09-2010, 01:32 PM
momofx's Avatar
momofx momofx is offline
Advance member
 
Join Date: Mar 2010
Location: IL
Posts: 113
Trader Rating: (0)
Default

Ok I am back again lol, I have a question about going brushless - since I will be using the Xcelorin 10250Kv Brushless Combo or either the 8750Kv Combo, how much runtime should I get compared to my stock brushed motor, running on a 300mAh 7.4V Lipo (stock lipo for this is 180mAh btw)?

You guys think I should get the 10250Kv motor (fastest but harder to control) since I will be using the DX2S controller which allows complete throttle programming, etc. etc. so I can slow it down indoors, etc?

BTW, the 8750Kv and 10250Kv kit are both priced the same....wierd.
Reply With Quote
  #9  
Old 06-09-2010, 02:38 PM
Donziikid's Avatar
Donziikid Donziikid is offline
XMS Administrator
 
Join Date: Apr 2007
Location: West Branch, MI
Posts: 3,564
Trader Rating: (5)
Send a message via AIM to Donziikid
Default

If they are the same price then definitely go for the 10250kV motor/ESC combo over the 8750kV motor/ESC combo. You can watch your trigger finger while running indoors with the 10250kV to keep the speeds down, but still be able to unleash pure fury outdoors.

I cannot help with the battery question.. never had either battery or either setup, but I am sure someone here has and can chime in!

Cheers,
Kyle
__________________
XMS Rules & Guidelines | B/S/T Rules | How To Post Pictures

Greyscale Racing Member

The Collection:
Mitsubishi Pajero | AE RC18MT
TLMicroCrawler | Xmod ShowRoom | 'Yota XTruck
"The fun begins when the pavement ends."

Reply With Quote
  #10  
Old 06-09-2010, 03:07 PM
momofx's Avatar
momofx momofx is offline
Advance member
 
Join Date: Mar 2010
Location: IL
Posts: 113
Trader Rating: (0)
Default

Ok thanks - I went with the 10250kV combo lol - for the price its a good deal at $50 for the brushless motor, esc and programming card, I think
Reply With Quote
  #11  
Old 06-09-2010, 03:31 PM
Action B's Avatar
Action B Action B is offline
Elite member
 
Join Date: Feb 2009
Posts: 424
Trader Rating: (8)
Default

Quote:
Originally Posted by momofx View Post
Ok thanks - I went with the 10250kV combo lol - for the price its a good deal at $50 for the brushless motor, esc and programming card, I think
Can you send me a link to that esc deal? I'm interested in possibly upgrading mine I have an FM reciever and module for my transmitter so why not?
__________________
XMS Approved Service Provider
I install FETs and do repairs on Xmods and Mini-Zs including the new 2.4Ghz ASF boards and MR-03s.
Reply With Quote
  #12  
Old 06-09-2010, 04:09 PM
xmodzracer's Avatar
xmodzracer xmodzracer is offline
I got nothin...
 
Join Date: May 2007
Posts: 575
Trader Rating: (0)
Default

Im running a 2s lipo and 10250kV and i get around twenty minutes run time just messing around. Driving around the room I actually have not killed the battery yet as I usually just jump a ramp over and over and it gets boring.
__________________

New Forum Needing Members:
http://rcunited.tk/
Reply With Quote
  #13  
Old 06-09-2010, 04:41 PM
mycrors4's Avatar
mycrors4 mycrors4 is offline
retired xmodder
 
Join Date: Jun 2009
Location: Los Angeles, California, USA
Posts: 1,177
Trader Rating: (4)
Send a message via AIM to mycrors4
Default

Quote:
Originally Posted by momofx View Post

BTW, the 8750Kv and 10250Kv kit are both priced the same....wierd.
it's like this for most brushless combo's out there.. some people dont need the extra speed, cause they will be racing around a track,

look at this one for ex:
http://www3.towerhobbies.com/cgi-bin...?&I=LXUTA4&P=7
http://www3.towerhobbies.com/cgi-bin...?&I=LXUTA5&P=7
http://www3.towerhobbies.com/cgi-bin...?&I=LXUTA6&P=7
http://www3.towerhobbies.com/cgi-bin...?&I=LXUTA7&P=7
http://www3.towerhobbies.com/cgi-bin...&I=LXXWJ0&P=ML

4 different motor combo's, same esc, someone racing in mod class would not want a 7700kv motor, but would rather get the 4600 or 5700 depending on what class they will be racing in...

its mostly a choice preference

here is the $50 for the 10000kv+esc combo
http://www.amainhobbies.com/product_...-Combo-10250kV
and the 8000vk
http://www.amainhobbies.com/product_...r-Combo-8750kV
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away

Check out my B/S/T Thread

Want remixes of some songs... PM me.. I has DJ programing software

Inventor of the idea of using Bob Saget to name R/C parts

٩(-̮̮̃•̃)۶
Reply With Quote
  #14  
Old 06-09-2010, 07:07 PM
momofx's Avatar
momofx momofx is offline
Advance member
 
Join Date: Mar 2010
Location: IL
Posts: 113
Trader Rating: (0)
Default

Quote:
Originally Posted by Action B View Post
Can you send me a link to that esc deal? I'm interested in possibly upgrading mine I have an FM reciever and module for my transmitter so why not?

Here it is Action : http://cgi.ebay.com/ws/eBayISAPI.dll...m=290443577994

Quote:
Originally Posted by mycrors4 View Post
it's like this for most brushless combo's out there.. some people dont need the extra speed, cause they will be racing around a track,

look at this one for ex:
http://www3.towerhobbies.com/cgi-bin...?&I=LXUTA4&P=7
http://www3.towerhobbies.com/cgi-bin...?&I=LXUTA5&P=7
http://www3.towerhobbies.com/cgi-bin...?&I=LXUTA6&P=7
http://www3.towerhobbies.com/cgi-bin...?&I=LXUTA7&P=7
http://www3.towerhobbies.com/cgi-bin...&I=LXXWJ0&P=ML

4 different motor combo's, same esc, someone racing in mod class would not want a 7700kv motor, but would rather get the 4600 or 5700 depending on what class they will be racing in...

its mostly a choice preference

here is the $50 for the 10000kv+esc combo
http://www.amainhobbies.com/product_...-Combo-10250kV
and the 8000vk
http://www.amainhobbies.com/product_...r-Combo-8750kV

Yeah thats what I was thinking....

Last edited by DRFTKO; 06-09-2010 at 09:04 PM.. Reason: double post
Reply With Quote
  #15  
Old 06-09-2010, 11:06 PM
momofx's Avatar
momofx momofx is offline
Advance member
 
Join Date: Mar 2010
Location: IL
Posts: 113
Trader Rating: (0)
Default

Hey guys I just thought about this - since I will be running a powerful motor - would I need to replace the gears in the tranny or perhaps the slipper clutch and main drive gear, etc? Just thinking....

....Or maybe I should just wait until it breaks lol
Reply With Quote
  #16  
Old 06-11-2010, 11:09 PM
momofx's Avatar
momofx momofx is offline
Advance member
 
Join Date: Mar 2010
Location: IL
Posts: 113
Trader Rating: (0)
Default

Just thought about this - do I have to re-grease the gears or anything if changing the housing to aluminum?
Reply With Quote
  #17  
Old 06-11-2010, 11:13 PM
mycrors4's Avatar
mycrors4 mycrors4 is offline
retired xmodder
 
Join Date: Jun 2009
Location: Los Angeles, California, USA
Posts: 1,177
Trader Rating: (4)
Send a message via AIM to mycrors4
Default

Quote:
Originally Posted by momofx View Post
Just thought about this - do I have to re-grease the gears or anything if changing the housing to aluminum?
i didnt, and i havnt had any problems yet
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away

Check out my B/S/T Thread

Want remixes of some songs... PM me.. I has DJ programing software

Inventor of the idea of using Bob Saget to name R/C parts

٩(-̮̮̃•̃)۶
Reply With Quote
  #18  
Old 06-11-2010, 11:13 PM
xmodzracer's Avatar
xmodzracer xmodzracer is offline
I got nothin...
 
Join Date: May 2007
Posts: 575
Trader Rating: (0)
Default

They come already greased and if i remember correctly the gearbox came with some sort of grease you can use if you want. but to answer your question, no you do not need to grease your gears

EDIT:
thats if you get the assembly. If you get just the case then id suggest doing so but no its not needed
__________________

New Forum Needing Members:
http://rcunited.tk/
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:40 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.