Go Back   XmodSource.com > Xmods > The XMS Repair and Modification Manual > XMOD Electrical Tutorials
Register FAQ Members List Calendar Gallery iTrader Today's Posts

 
 
Thread Tools Display Modes
  #1  
Old 01-05-2008, 06:29 PM
lol lol is offline
Banned
 
Join Date: Jun 2007
Posts: 1,001
Trader Rating: (14)
Default How to Rewire your Xmod using 18 AWG Speaker Wire

I got like 100 feet of 18AWG wire for $1.99. Its speaker wire but it still can be used (correct me if I'm wrong) I will post pics ASAP. I recommend reading this tutorial first then start to rewire your xmod.

supplies:

Several Ft of 18AWG Wire(or wire of your choice) I used speaker wires
Wire Cutters
Soldering Iron
Desoldering Braid
Wire Stripper or Sharp knife
Red and Black Sharpie (not required but recommended)

-------------------------------------------------------------------------------------

1. Use wire cutters to cut the wire into your preffered length. Use a wire stripper or a knife to remove the rubber tubing from the wire tips. (remove 1cm of the rubber tubing tip of each wire)

2. Get out your Xmod (duh!) and desolder the wires connecting the battery holders. Remove all wire you want to be replaced. NOTE: draw a diagram how the wires go just in case you forgot where the wires go or you can just find a wiring diagram online.

3. Tin the wires that you are going to use to rewire your Xmod

4.Solder the wires according to the diagram. If you are replacing the wires that connect to the EP from the battery packs becareful, you dont want a fried EP. Use the 5-second rule or the 8 second rule to avoid burning . (I forgot what second)

5. Make sure the wires fit nice and good. If the wires rubber tubing isn't colored, use the Sharpies to mark out the -'s & the +'s. (red positive, black negative)

6. Gently pull the wires if one comes off you need to resolder. You dont want your Xmod to short circut and ruin your Xmod.

7. Put your car back together and test fit it with the body.Make sure no wire gets caught in the wheels, diff, gears....etc.

8. Test your car out. If everything works Good, Get out a soda and jug it down. If not repeat step 5-7. If you have any problems put them here. Suggestions are also welcome. I will post pics up Wink Enjoy that rewired Xmod

Pics: [They are old and that Gen 1 Died long ago =( ]





  #2  
Old 01-05-2008, 06:58 PM
xmodscarbon's_lost xmodscarbon's_lost is offline
Banned
 
Join Date: Jan 2008
Location: Feeding steve erkel in my basement.Wait i don't have a basement.....and i'm not awake.
Posts: 289
Trader Rating: (2)
Default

does it work for the evo?!?!?!?!?
  #3  
Old 01-05-2008, 08:09 PM
lol lol is offline
Banned
 
Join Date: Jun 2007
Posts: 1,001
Trader Rating: (14)
Default

yup same concept
  #4  
Old 01-05-2008, 08:11 PM
xmodscarbon's_lost xmodscarbon's_lost is offline
Banned
 
Join Date: Jan 2008
Location: Feeding steve erkel in my basement.Wait i don't have a basement.....and i'm not awake.
Posts: 289
Trader Rating: (2)
Default

Quote:
Originally Posted by AzNKevin4EvA View Post
yup same concept
cool i will try that when i get my EP board
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.