Go Back   XmodSource.com > Xmods > The XMS Repair and Modification Manual > XMOD Electrical Tutorials
Register FAQ Members List Calendar Gallery iTrader Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
  #1  
Old 12-30-2008, 08:57 PM
TripleXmodder(akaXXX)'s Avatar
TripleXmodder(akaXXX) TripleXmodder(akaXXX) is offline
Working Class Hero
 
Join Date: Oct 2008
Location: Here and There... Cali right now
Posts: 1,251
Trader Rating: (32)
Send a message via MSN to TripleXmodder(akaXXX)
Default XXX TuT's: 1 - Micro Servo to PCB

I have decided that I will start helping out my friends here at XMS by posting some easy to follow Tutorials (TuT's). Some have been done but maybe don't have good photos or maybe lack some fine detail (No offense to anyone who has dedicated there time to making a tutorial). I just have the means of making clear photos, plenty of extra parts and time to do whatever I please.

*** Special thanks to: FieldFairy2, Color0 and Dave's Hobby Central.

*** SAFETY FIRST *** Wear saftey goggles when using drills and a dust mask when cutting Carbon Fiber.

This first Tutorial is how to swap the stock servo motor to a micro servo on an Xmod Evo/Street PCB. I don't feel like anyone should really do this mod unless there is a good reason to, and to improve steering IS NOT one, as it just makes the car sloppy. However it is great fun and helps with young modders understanding of how the cars work so here it is.

WHAT YOU NEED

OOPS forgot these


STEP 1 - No photo for this. **MAKE SURE TO REMEMBER WHERE ALL WIRES GO BEFORE CUTTING THEM OFF. I suggest taking photos of everything when you start and as you go, when memorization is needed.

STEP 2 - Remove the cover to the servo motor by pull open the tabs.


STEP 3 - Pull out the servo motor.


STEP 4 - Take your front end and remove everything. Shocks, knuckles, A arms.


STEP 5 - pop out the POT and the servo board and pull the wires out.


STEP 6 - Unscrew the 3 screws to seperate the front end casing.


STEP 7 - Now we start cutting. Take the back side of the front end case and cut off the portion in red. This should leave it flat on this side.

Should look like this.

Be sure to cut off the side of the circle opening where the drive shaft goes. This will let your servo have a clean swing left to right.

Using your file, sand paper, exacto knife or dremel and make it squeaky clean and purrrrty.


STEP 8 - Now take the swing arm and cut out the red portion you see in the photo. A dremel works best, but you can use an exacto knife. Careful with snipes because they can crack it.

Should look like this.


STEP 9 - Take the long arm and firgure out the length you need. (This will be different for everyone and depends on what chassis you use ie: stock, stilletto, or a custom chassis. Once you know what length you need take the small drill bit from yout Xmod tool kit. Carfully drill a hole and attach it to the servo.

Should look like this.


STEP 10 - Take an Xmod screw and a RS 2/56 nut and attach them to the arm like this.


STEP 11 - The screw will go in the swing arm like this, so test fit it and make sure it is loose. If its not loose dremel out the swing arm a little more. (There should be play and not tight)


Should be loose so that it will work smooth, like this.


STEP 12 - Go ahead now and re-assemble your front end completly ( dont put the back side of the casing back on, you can throw that in your spare parts box.


STEP 13 - Okay, now thats done on to the electronics. (Remember to note where all wires go before cutting them off)
Take out the 4 screws in the Micro servo (HS-55 for tutorial)

Gently pull out the board and stretch out the wires inside. You should have this.


STEP 14 - Cut the 3 POT wires from the board, just like this.


STEP 15 - Cut the Black and Red motor wires from the board, just like this.


STEP 16 - Cut the brown wire off at the motor (you should desolder it, but snip it as close to the motor as possible if you cut it). Like this.


STEP 17a - Okay, now connect the servo to the board like this. You can decide to use all new wires or splice, just becareful and don't be sloppy.



STEP 17b - Make it clean and cool. Drill 2 holes in your servo cover. Slide the cover over the wires before you solder them to the board. Just like this.


Mmmmmm, that's purrrty.


STEP 18 - Well that's it. Use some double sided tape or superglue and attach it to your chassis. Enjoy and here's a video, my batteries were low on the car but you get the idea.


************************************************** *******

What Tutorial would everyone like to see next. PM me and keep the clutter out of the thread so that people can post their questions easier. THANKS.
__________________

XXX FREE modding Service: http://www.xmodsource.com/forum/showthread.php?t=17800
PM me for a quote or any questions. HAPPY MODDING

100% Positive Itrader feedback http://www.xmodsource.com/forum/itrader.php?u=6901

Last edited by TripleXmodder(akaXXX); 01-04-2009 at 11:08 PM..
  #2  
Old 12-30-2008, 09:03 PM
fieldfairy2's Avatar
fieldfairy2 fieldfairy2 is offline
late model, xmods, microt
 
Join Date: Oct 2007
Posts: 972
Trader Rating: (5)
Default

good tutorial. Just about how i did mine except for the tierod. I lengthed my tierod(where the servo horn connects to the tierod) so it would have less stress on the gears, and reduce breaking them(happened to me). I am glad you found my tutorial useful for yours...
__________________
Track car v2.0
fieldfairy2's mini late model
Operation black widow
H-Crawler
  #3  
Old 12-30-2008, 09:03 PM
skim4food's Avatar
skim4food skim4food is offline
Stage 2 member
 
Join Date: Sep 2008
Posts: 95
Trader Rating: (2)
Send a message via Yahoo to skim4food
Default

wow i actually understood that tutorial! this makes me want to do the mod now ty! very clear images and explained everything you needed to, and nice diagram.
__________________
YouTube.com/SkimPure
  #4  
Old 12-30-2008, 09:21 PM
TripleXmodder(akaXXX)'s Avatar
TripleXmodder(akaXXX) TripleXmodder(akaXXX) is offline
Working Class Hero
 
Join Date: Oct 2008
Location: Here and There... Cali right now
Posts: 1,251
Trader Rating: (32)
Send a message via MSN to TripleXmodder(akaXXX)
Default

Quote:
Originally Posted by fieldfairy2 View Post
good tutorial. Just about how i did mine except for the tierod. I lengthed my tierod(where the servo horn connects to the tierod) so it would have less stress on the gears, and reduce breaking them(happened to me). I am glad you found my tutorial useful for yours...

Yes, Thank you. Must give credit where credit is due. I used your tutorial as a resource. I added that to the original post.

Actually this way has less stress because the screw on the servo arm should be loose in the swing arm and can move freely up and down as the swing arm swings. Just like this.

__________________

XXX FREE modding Service: http://www.xmodsource.com/forum/showthread.php?t=17800
PM me for a quote or any questions. HAPPY MODDING

100% Positive Itrader feedback http://www.xmodsource.com/forum/itrader.php?u=6901
  #5  
Old 12-30-2008, 09:44 PM
fieldfairy2's Avatar
fieldfairy2 fieldfairy2 is offline
late model, xmods, microt
 
Join Date: Oct 2007
Posts: 972
Trader Rating: (5)
Default

thanks for the credit.

Mine moved freely too but it still broke the gear or 2. I would lengthen the tierod part and shorten the servo horn, i haven't had any problem since. Just a suggestion.
__________________
Track car v2.0
fieldfairy2's mini late model
Operation black widow
H-Crawler
  #6  
Old 12-30-2008, 09:51 PM
TripleXmodder(akaXXX)'s Avatar
TripleXmodder(akaXXX) TripleXmodder(akaXXX) is offline
Working Class Hero
 
Join Date: Oct 2008
Location: Here and There... Cali right now
Posts: 1,251
Trader Rating: (32)
Send a message via MSN to TripleXmodder(akaXXX)
Default

Quote:
Originally Posted by fieldfairy2 View Post
thanks for the credit.

Mine moved freely too but it still broke the gear or 2. I would lengthen the tierod part and shorten the servo horn, i haven't had any problem since. Just a suggestion.
You shouldn't have to lengthen the arm. I think it would be smoother this way. Also you keep it nice and clean and lengthening it gives you a weak spot. This really should be alot better then lengthening the swing arm, STRONG and SMOOTH swing. But post a photo of your lengthen swing arm for modders to have an option and decide which way they what to go with it.
__________________

XXX FREE modding Service: http://www.xmodsource.com/forum/showthread.php?t=17800
PM me for a quote or any questions. HAPPY MODDING

100% Positive Itrader feedback http://www.xmodsource.com/forum/itrader.php?u=6901
  #7  
Old 12-30-2008, 10:16 PM
fieldfairy2's Avatar
fieldfairy2 fieldfairy2 is offline
late model, xmods, microt
 
Join Date: Oct 2007
Posts: 972
Trader Rating: (5)
Default




Actually i never noticed a performance difference but whatever works.

here is the conversation about the would lengthing the tierod
http://www.xmodsforum.co.uk/showthre...over+track+car
__________________
Track car v2.0
fieldfairy2's mini late model
Operation black widow
H-Crawler
  #8  
Old 12-30-2008, 10:18 PM
youngxmodder's Avatar
youngxmodder youngxmodder is offline
Owner of a 1992 Accord.
 
Join Date: Jan 2008
Location: in the U.S.A.
Posts: 254
Trader Rating: (8)
Send a message via AIM to youngxmodder Send a message via MSN to youngxmodder Send a message via Yahoo to youngxmodder
Default

nice i should do this on my xtruck for a stronger steering servo so i can turn in the tough conditions.
__________________
Quote:
Originally Posted by mr.hotrod
OOH it needs a VTAACCCKKK and NAWWZZZ.
  #9  
Old 12-30-2008, 11:55 PM
TripleXmodder(akaXXX)'s Avatar
TripleXmodder(akaXXX) TripleXmodder(akaXXX) is offline
Working Class Hero
 
Join Date: Oct 2008
Location: Here and There... Cali right now
Posts: 1,251
Trader Rating: (32)
Send a message via MSN to TripleXmodder(akaXXX)
Default

Quote:
Originally Posted by youngxmodder View Post
nice i should do this on my xtruck for a stronger steering servo so i can turn in the tough conditions.
The swing arm setup is different on the trucks, so you couldn't go exactly by that part of the tutorial. I will work on a swing arm tutorial for the truck after I get back from Disneyland on the 4th.
__________________

XXX FREE modding Service: http://www.xmodsource.com/forum/showthread.php?t=17800
PM me for a quote or any questions. HAPPY MODDING

100% Positive Itrader feedback http://www.xmodsource.com/forum/itrader.php?u=6901
  #10  
Old 12-31-2008, 12:56 AM
KITT222's Avatar
KITT222 KITT222 is offline
Bored...
 
Join Date: Apr 2008
Location: South of the Cities, Minnesota
Posts: 502
Trader Rating: (7)
Default

Quote:
Originally Posted by youngxmodder View Post
nice i should do this on my xtruck for a stronger steering servo so i can turn in the tough conditions.
i did something like that with a Hitec HS-56 on my crawler project. i took the battery tray our from its location, than i glued it on the right side of the chassis, then i used the stock steering rod, and used some hobby stuff to get it to work PERFECTLY.
  #11  
Old 12-31-2008, 02:14 AM
TripleXmodder(akaXXX)'s Avatar
TripleXmodder(akaXXX) TripleXmodder(akaXXX) is offline
Working Class Hero
 
Join Date: Oct 2008
Location: Here and There... Cali right now
Posts: 1,251
Trader Rating: (32)
Send a message via MSN to TripleXmodder(akaXXX)
Default

Quote:
Originally Posted by KITT222 View Post
i did something like that with a Hitec HS-56 on my crawler project. i took the battery tray our from its location, than i glued it on the right side of the chassis, then i used the stock steering rod, and used some hobby stuff to get it to work PERFECTLY.
Sounds like a good build. Just a question, is it really worth it on the front steering for a crawler, considering what your actually getting for sticking a big servo in the chassis?
__________________

XXX FREE modding Service: http://www.xmodsource.com/forum/showthread.php?t=17800
PM me for a quote or any questions. HAPPY MODDING

100% Positive Itrader feedback http://www.xmodsource.com/forum/itrader.php?u=6901
  #12  
Old 01-04-2009, 11:10 PM
TripleXmodder(akaXXX)'s Avatar
TripleXmodder(akaXXX) TripleXmodder(akaXXX) is offline
Working Class Hero
 
Join Date: Oct 2008
Location: Here and There... Cali right now
Posts: 1,251
Trader Rating: (32)
Send a message via MSN to TripleXmodder(akaXXX)
Default

BUMP.

Added step 17b.
__________________

XXX FREE modding Service: http://www.xmodsource.com/forum/showthread.php?t=17800
PM me for a quote or any questions. HAPPY MODDING

100% Positive Itrader feedback http://www.xmodsource.com/forum/itrader.php?u=6901
  #13  
Old 01-11-2009, 07:39 PM
xmodkidd33's Avatar
xmodkidd33 xmodkidd33 is offline
washed-up, retired, cool.
 
Join Date: Jul 2006
Location: Pittsburgh, PA.
Posts: 1,264
Trader Rating: (1)
Default

Bump... Lol.

How's the durability of the HS-55?
__________________
Woah.

  #14  
Old 01-13-2009, 03:48 AM
TripleXmodder(akaXXX)'s Avatar
TripleXmodder(akaXXX) TripleXmodder(akaXXX) is offline
Working Class Hero
 
Join Date: Oct 2008
Location: Here and There... Cali right now
Posts: 1,251
Trader Rating: (32)
Send a message via MSN to TripleXmodder(akaXXX)
Default

Had to post this. This is someone who did an awsome mod. I wouldn't use it but it rocks, way to be creative. (It's a servo install) Check it out please. http://www.youtube.com/watch?v=B8oWz...eature=related
__________________

XXX FREE modding Service: http://www.xmodsource.com/forum/showthread.php?t=17800
PM me for a quote or any questions. HAPPY MODDING

100% Positive Itrader feedback http://www.xmodsource.com/forum/itrader.php?u=6901
 


Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:24 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.