motor help

[bosco72]

I have a Anima II PN racing modified motor.Do i have to stack fets on a xmod street

[Action B]

Originally Posted by bosco72

I have a Anima II PN racing modified motor.Do i have to stack fets on a xmod street

From PNracing.com website:

Model No. 11AM33
Product Name Anima II Modified Motor
Product Detail The Anima II has been designed with the open class racer in mind. PN highly recommends using an external turbo or a 2x3 or more FET stack to run this motor. A quick look at the stats and you’ll see why. If top end and torque is what you crave for your 2WD look no further, this is the motor for you.

Designed for: MR01, MR015, MR02, and F1

An external turbo or a 2x3 FET stack is required.

Stats:

- 25% faster then the Anima
- 33 turn balanced armature
- High temperature wire
- New endbell design for increased cooling
- High performance carbon brushes
- Ball Bearing can, front and rear
- Gold Neo Magnets

Performance – no load
Speed = 42,075 RPM
Current = 1.1 AMP

At Stall Extrapolation:
Torque = 346 g.cm
Current = 37 AMP (MUST BE A TYPO, PROBABLY 3.7AMP - Action B)

Hope this helps!

[bosco72]

Thanks

[tayyab]

A quick tip:whenever looking at motors. just keep in mind anything below 45T WILL require an FET stack.
its very rare that something else would matter besides the amp drawn.

also, keep in mind if you use the wrong gearing setup(depends motor to motor)you'll blow your FETs.

Later, T.I.M