#1
|
||||
|
||||
Homemade 'Shock Socks'
Hey guys, I wanted to show you this mod I did with my GT2 about a month ago... I believe its been done many times before, but here it goes!
Enjoy: Don't mind the shock on the other side... I ran out of the darker shade of orange and ended up having only loose ones. The 'long' balloons are perfect for this. I used the regular oval shaped ones. EDIT: Here's an action shot I just made: Here's the step-by-step how-to: Quote:
For those who can't afford (?) or can't seem to locate Du-Bro's body clip retainers, a good tip would be to just slide it onto a hole on your car's body! In this case, I slid my body clips onto the tank fill-up/opening hole! Another tip, especially for nitro vehicles with bodies that slide over top of your exhaust stinger, is to take a piece of fuel tubing, cut it in half (lengthwise) and roll it into the hole on your body for the exhaust. This way, your body doesn't slowly cut up your stinger from all the vibration (its true, there have been cases where stingers have been damaged by vibration from bodies!). Last edited by REDisFASTER; 01-03-2008 at 01:21 AM.. |
#2
|
||||
|
||||
Now this is a good mod,im going to try it today.. THANKS ALOT !!!
how did you get a video to be something like a moving picture ??
__________________
My youtube channel! Last edited by snowboi1289; 01-03-2008 at 05:26 AM.. |
#3
|
|||
|
|||
its a .gif file. I might try this with my propulse.
|
#5
|
||||
|
||||
Ha, that is tricky. Going to do it on the Propulse when I get motivated to mess with it.
__________________
You know what I'm gonna do? I'm gonna get myself a 1967 Cadillac Eldorado convertible, hot pink, with whale
skin hubcaps and all leather cow interior and big brown baby seal eyes for headlights. Yeah! And I'm gonna drive around in that baby at 115 miles an hour, getting 1 mile per gallon. I may be king of the idiots, but my kingdom is vast and my subjects are everywhere |
#6
|
||||
|
||||
Does it add any performance to it? Or is it more of a spring dress up? it looks good. especially if you have oil filled shocks it would keep them clean or more cleaner i guess?
__________________
|
#7
|
||||
|
||||
Read it
Quote:
__________________
You know what I'm gonna do? I'm gonna get myself a 1967 Cadillac Eldorado convertible, hot pink, with whale
skin hubcaps and all leather cow interior and big brown baby seal eyes for headlights. Yeah! And I'm gonna drive around in that baby at 115 miles an hour, getting 1 mile per gallon. I may be king of the idiots, but my kingdom is vast and my subjects are everywhere |
#9
|
||||
|
||||
Motivated? Know that feeling..
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen" |
#10
|
||||
|
||||
I haven't messed with it in awhile. I lost the dremel cutoff-wheel's screw, so I can't cut the metal disks in the driff to allow a pin to go though, perma locking the SOB.
That, and it's kinda cold and windy today, so screw that.
__________________
You know what I'm gonna do? I'm gonna get myself a 1967 Cadillac Eldorado convertible, hot pink, with whale
skin hubcaps and all leather cow interior and big brown baby seal eyes for headlights. Yeah! And I'm gonna drive around in that baby at 115 miles an hour, getting 1 mile per gallon. I may be king of the idiots, but my kingdom is vast and my subjects are everywhere |
#13
|
||||
|
||||
I gotta get some balloons to put on my Nitro Stampede's shocks now. Thanks RED! Forget about my crappy, messed up Pro-Pulse. Nitro is better by far! My wheelie bar is still yet to come!
EDIT. My exhaust comes out the rear below the body, I don't have to do that mod which you posted. Dual rear exhaust is great! Lol. Sorry. I am such a show-off.
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 |
#14
|
||||
|
||||
Quote:
|
#15
|
||||
|
||||
Lol. Will it be able to scare a Jato 3.3 back into its box? I need new shocks as I posted before this place was hacked. Hmm...what can I do with $35? May just go back to stockers. If it breaks again, I'll go more durable.
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 |
#16
|
||||
|
||||
It'll do MUCH more than that! You know Team Losi's LST? The one with the Mach 427 engine? I was talking with a guy on RCU who has a Mach 427 in his Jato... The LRP Z.28R will certainly put the Jato back in its box and ship it back to Plano, Texas, right back to Traxxas!!!
But yeah, if I were to get the non-pullstart version (would mean I would have to buy a starterbox sooner, I will be 0.1 HP short of 4 horsepower!!! (4 - 0.1 = 3.9 for those with math deficiency ) |
#17
|
||||
|
||||
Quote:
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 |
#18
|
||||
|
||||
Quote:
You can't scare the Revo back, maybe the Crap-Maxx. But as soon as you flip, the Revo will pass you... Plus the Revo is bigger and with 40series, I'll just run over you.. That's assuming the 3.3 doesn't overheat by then. Seriously, save the money and buy a Cat-Back when you get a car.
__________________
After a thousand years of oppression,
Let the berserks rise again, Let the world hear these words once more: "Save us, oh lord, from the wrath of the Norsemen" |
#19
|
||||
|
||||
lol, yep, mine's a GT2!
As for the engine, his is a non-pullstart. He used a starter box or a drill-start mechanism. I found a PS (pullstart) one on Horizon Hobby for $150 USD: http://www.horizonhobby.com/Products...ProdID=DYN0895 Make sure your axles and transmission are up to the task! The guy with the Jato has gone through so many transmission gears that he went for a bronze gear setup. He recently broke an axle a day ago I believe. Sweed - the T-MAXX is sick! Its be best selling R/C truck in R/C history! Its got so much potential for modification and performance! You can basically chose where you want to go with the T-Maxx and it'll take you there! If I had extra dough, I'd totally buy one! Last edited by REDisFASTER; 01-04-2008 at 09:24 PM.. |
#20
|
||||
|
||||
Still, I'll have a wheelie bar by then, but when I make 1 wrong move, you can come up to NY and run my Stampede over with your REVO. Or in 3 years when I move to Florida, you can come to Port St. Lucy and run over it . Lol. The T-Maxx is Traxxas's best selling truck so I don't know what you are talking about. We need Noturday in here to tell us about his T-maxx 3.3 so we can have a good explanation about the Maxx.
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|