April COTM, open comp entry thread.

[BART]

Donziikid is away in the ocean on a luxurious cruise so I am going to try to wing this for you. Be patient with me. I in no way take credit for this wonderful layout that Donziikid has been using, i just copied it and changed some dates around





Please be sure to read all of the following rules and guidelines before making a submission. Failure to comply with any of the following rules could result in the pulling of your entry and suspension of your competition privileges. This applies to both entrants and voters.

Howdy and welcome to the April 2009 “Open class” COTM. This thread contains all of the rules and guidelines that need to be followed in order to be in the running for this competition. If you have any questions about rules, guidelines or the COTM process, please post them in the April 2009 Discussion Thread or send them via PM message to Donziikid.

Rules for Entering the April “Open class” Competition:

1. Your entry must be a fully functioning Xmod owned by yourself. Any Xmods entered that are sold to another member/person before or during the competition will be removed/voided.
2. Entries must be submitted by April 30, 2009 at 9:00PM EST. Any entries made after that time are disqualified. Please be on time; do not let your hard work go to waste!
3. This is an Open Class competition.

Rules for Participating in the April “Open class:

1. You must be a member of Xmodsource.com since March 9, 2009. Anyone who has joined Xmodsource after that date is not eligible.

2. Pictures:
2a. All pictures are required at the time of submission. Editing for size or number of pictures is not allowed. Get it done the first time so the Staff doesn’t have to hound you for pictures.
2b. A minimum of four pictures are required. A maximum of seven pictures is allowed.
2c. One of these pictures must include a picture of your fully functional chassis.

3. All members are limited to one entry.

4. A list of body and chassis upgrades is required at time of submission.

Rules for Voting in the April “Open class” COTM:

1a. To vote, you must have been a member of Xmodsource.com since December 31, 2008. Anyone who has joined Xmodsource after that date is not eligible.
1b. Any members caught cheating will be instantly disqualified.
1bb. Any member self voting will have vote removed.

2. All entries are due April 30, 2009 at 9:00PM EST in order for the entrants to be accounted for and the voting thread to be created. One week will be allotted for voting. Voting will end on May 6, 2009.

3. As a reminder, voting is watched very closely. Anyone caught cheating will be instantly disqualified; infraction points could also follow, as well as a possible suspension from the website. All votes considered as cheating will be deleted in the final tally.

All rules subject to change. Please review all rules before making final submission.

Cheers and good luck,
Kyle and the Xmodsource Moderating Staff.

[Donziikid]

Meh, close enough. Thanks for posting BART; forgot to do so myself before leaving for the trip. Which, by the way, was amazing.

Cheers,
Kyle.

[Bananabrain]

Ok, here is my Redneck Mudder (not 100% finished but very close)
Custom Dodge Ram Body
Mods:
Irocks
Offroad Upgrade
Custom Extension
Custom Mounts
Custom Paint Job
10.5mm Axel Extention
Stage One Motor (8:25 Gearing)
(Still Need Custom Drive Shaft)

[Donziikid]

This is open class, gentlemen, where are all the entrants!? Post em. Let's see what you're capable of bringin' to the show!

Cheers,
Kyle.

[blue504life]

1950 Ford F-1








specs
model body and wheels
custom cut chassis (thats the only pic i have on if)
slammed wheels
lowered rear shocks
1/16 in chassis extention

needs. smaller board and bearings

thanks good luck to all

[Donziikid]

Two entrants? Is that all? Seriously? Open Class, guys. Enter anything you wish (as long as it's an Xmod)!

Cheers,
Kyle.

[xmodzracer]

Toyota Supra:
-Xmods Evo Chassis
-Metal Bearings
-BBS Wheels
-Metal Lug Nuts
-Radline Electronics
-Switch Bypass
-Six Cell Mod
-Custom UV Glow Paint
-Extreme Weight Reduction
-Thick Wire Upgrade
-Lens' Removed from excessive cracking

THIS CAR WAS DESIGNED AS A BASHER BUT SINCE THERE ARENT ANYOTHER ENTRIES IM THROWING IT IN. YES MY PAINT SUCKS....









These are under a black light:

[Donziikid]

Awesome!

Welcome to the competition!

Keep em' coming, guys!

Cheers,
Kyle.

[monsterhunter]

well heres my 1969 ford torino talladega.
custom ford body.
mods:
custom body, and mounts.
pretty much full interior.
custom chassis, runs under interior.
helimax motor
lithium batteries.
custom wired.
drags slicks on hot rod rims rear
treaded car tires on slammed rims front.
custom board location.

[Donziikid]

Welcome to the competition youngxmodder and monsterhunter!

Cheers,
Kyle.

Tough competition here....but here's my entry...my first Xmod:

1998 Camaro

RWD Evo (Barricade) chassis

Body:

1/25 scale model body
T-top conversion
Automotive metallic red paint
Partial interior - dash, rear hatch area
Antenna relocated to rear fender

Drivetrain:

Stage 2 motor
Torque gears
Locked differential
Metal heat sink
NmH rechargable batteries

Chassis:

Battery tray moved rearward (for balance)
5-spoke wheels (upgrade kit)
Soft tread tires
Stainless wheel lugs
Wheel spacers (for width)
1.5° tie rod / steering upgrade
Front springs: stock (softer ride for control on regular asphalt)
Rear springs: yellow (upgrade)















And on a side note, this car isn't a shelf queen...I have put plenty of "miles" on it


.

[mr.hotrod]

here is my entry 68 mustang dragster
it has just in
gpm dogbones all 4 corners
ceramic berings
2x2 fets
li-poly batts
stilleto chassis
delrin gears
custom pattern wound 55 turns armature
custom model body
part of model engine
deans micro plugs
custom lego mounting method
power switch bypass
here are the pics






sorry about the pics i had to get a new camera. **** garage sale camera

[SkysTheLimit]

Seems like a few last minute entries...well here's another.

My so-far-done Xmods Street 1995 Nissan Skyline GT-R (R33 version)
$40 budget. Did what I could with the money but it honestly doesn't need more.

The car weighs in (with 4 AAA rechargables) as a luxury car! 243g.

Modifications:
-Lowered Xmods street chassis
-AWD
-Command Logic Lights

Body:
-Silver sparkle paint
-Custom body mounts
-Strong chassis extension- I don't believe in the dual bars on top- not strong, not precise.
-FULL Interior (including door side panels&window buttons, armrests, shifters, seats, rear deck, NOS bottle, dash, instrument panel, buttons. etc!)
-Custom made exhaust (replica of a real R33 exhaust)
-Fully hidden light kit with custom mounts
-"Xenon" style LEDs with white, light blue, and purple highlights
-Engraved GT-R logo on the extension
-Real mirrors (chrome)

Much more, unlisted.









Thanks!

[c1v1c]

Xmod Truck series Rock Crawler
-55 cameo body
-Servo motor mod
-Hobbygrade steering servo
-Front bumpsteer fix suspension
-Wide axle tut
-Rear solid axle mod
-Modded offroad/stock tires

Good luck to all entries!

[firebird999]

chassis is stock other than tires and rims, body has a trailer hitch w/trailer, custom lift, bodykit, decals, custom made [those 4-6 holes that line the bed of most pickups that are used to attach bungee cords for hauling large loads], and a custom smokestack exhaust.

[merc3des]

Well my computer hard drive crashed (I dropped my laptop), and I'm on this piece of sh*t computer. I have one set of pictures of the body on a roller and one set of pictures on the real chassis. Since my last update I made everything nicer than what I'm posting. Please give me the benefit of the doubt, it sucks for me too, as I made the car even nicer than it was on the roller. Won't be active for a while either, my computer is busted...

Also sorry for the pictures that aren't consistent.. I had very few pictures saved on this computer. Donzii, if there is any issues talk to me.

The Micro-ZX
AKA: Haulin' 4SS

This is possibly my best work yet, with a custom CF chassis, a Mini-Z rear pod, a sexy body.. here we go now. Good luck to the other entrants.

Upgrades, Tweaks, and other stuff:
Custom made carbon fiber chassis by me
Custom Carbon Fiber upper deck
Custom Lithium kit
Micro-T Electronics Kit
Micro-T Servo
PN Racing MR-02 Rear Pod
PN Racing Disk Damper System
Hemi-Cuda body
Working lights kit
Bearings
Painted rims
Upgraded differential
GPM front A-Arms
A roller chassis for the Hemi-Cuda, including, Roll cage, NOS bottle, and interior.
License plate: Haulin 4ss









Roller for Hemi:

[KITT222]

Well i suppose I'll enter another real-life-Xmod Xmod!

anyone watch Bullrun on Speed channel? Well I'm entering the badboys who totaled their car... Team Evo! I like them for the car, not the people. Anyways...

Xmod Street chassis
raised a few milimeters
painted Z06 wheels
darker taillight from other rear bumper added to stock bumper
carbon fiber decal fenders and hood
custom waterslide decals
100ma/h AAA NiMH batteries
CLL kit
AWD
Apeedy 05 motor
expirmenting with large, long, square copper antennae
bumblebee front clip (Lancer front BK would raise the front end too high)

Now for pics!!

1st the car I wanted to replicate

next the Xmod!