Go Back   XmodSource.com > Xmods > The XMS Repair and Modification Manual > XMOD Body Tutorials > XMOD Paint Tutorials
Register FAQ Members List Calendar Gallery iTrader Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
  #1  
Old 07-06-2008, 09:27 PM
Lancer_Man's Avatar
Lancer_Man Lancer_Man is offline
LM Graphics
 
Join Date: Jun 2007
Location: Reno, NV
Posts: 425
Trader Rating: (5)
Default Airbrush Tutorial: Ghost Flames

This tutorial will show you how to paint ghost flames on your XMod.

-----

1. Gather all the materials.
-Paints
--Base coat
--Metallic base (gold/silver)
--White
--Clear color of your choice
--Clear coat
-Airbrush
-Masking tape (Try to get relatively transparent tape)
-Pencil
-Craft knife with fresh blade
-Clear plastic (Not pictured)



2. Mask off the windows, and then lay down the base coat. Let this fully dry, and then lay down the metallic base.
Note - the body doesn't have full coverage because I am only painting the bottom half.


3. Get your masking tape and draw out your flames. Take your time and do it right. I went for a tribal flame design here.



4. Place the flame design over the clear plastic (Here I used a CD).



5. Place a blank piece of tape on the other side of the plastic, making sure it fully overlaps the tape with your flames on it. Then, put the plastic on a window so light shines though. You should be able to see the flame design under the blank tape; trace it onto the blank tape. This whole process gives you two flame designs, one for each side, and it saves the trouble of freehanding two flame designs.



Take one of the flame designs and place it on a smooth, dirt free surface. Cut out the flames CAREFULLY. I repeat - TAKE YOUR TIME. This is a crucial step where the paintjob could go right or very wrong. Once you're done cutting, CAREFULLY pull away the actual flames. Here, we want the negative.



Take another piece of tape and place it over the cutout. It is helpful to use tape with less adhesion, so the following steps are easier. Then, pull away both pieces of tape, again, carefully. There are thin parts that could easily tear.



Place the pieces of tape on the body, and pull away the top piece of tape. (Careful!)



Make sure the tape is fully seated on the body; you can press it down with a finger. Now, get the metallic color and white. Mix around 60% white and 40% gold, you can add more white to get a lighter and more subtle design.



Spray the flames, let it dry, and then pull off the tape.



Now, spray the clear color. Spray it evenly, anywhere the paint is heavier, the color will be darker. Let that dry, and then follow with a clear coat. You can polish it up to really get a good shine.



This is as distinct the flames get. When you are not looking at an angle, they are very subtle.

-----

Flames aren't the only thing you can ghost. Be creative - the only time you'll be fully satisfied with yourself is when you are not completely following a tutorial. Don't be afraid to add your own touch to it.

Congrats,
-LM
__________________

I will not be able to visit these forums very much anymore. If you need to contact me, please e-mail me at lancermangsr@gmail.com. I will finish up all bodies I have and get them shipped to each of their owners. Thank you.
  #2  
Old 07-06-2008, 09:34 PM
xmodkidd33's Avatar
xmodkidd33 xmodkidd33 is offline
washed-up, retired, cool.
 
Join Date: Jul 2006
Location: Pittsburgh, PA.
Posts: 1,264
Trader Rating: (1)
Default

Some logos or numbers would be awesome to ghost! Great tutorial. I personally liked it with just gold, but the red is very nice as well. Is this a sneak peek at a future project?
__________________
Woah.

  #3  
Old 07-07-2008, 12:10 AM
JDMDUDE's Avatar
JDMDUDE JDMDUDE is offline
Elite member
 
Join Date: Aug 2007
Posts: 300
Trader Rating: (0)
Default

man that paint job looks good
  #4  
Old 10-02-2008, 02:18 PM
devbell devbell is offline
Banned
 
Join Date: Jun 2008
Location: Seattle WA
Posts: 11
Trader Rating: (0)
Default Awesome Tutorial!

Great tutorial with lots of techniques. Thanks!
  #5  
Old 10-02-2008, 05:54 PM
torredo's Avatar
torredo torredo is offline
Xmod Expert
 
Join Date: Jan 2005
Location: Interior BC
Posts: 1,440
Trader Rating: (0)
Send a message via AIM to torredo
Default

very nice write up!!
  #6  
Old 10-03-2008, 09:47 PM
merc3des's Avatar
merc3des merc3des is offline
Elite member
 
Join Date: Apr 2008
Location: Long Island, NY
Posts: 550
Trader Rating: (4)
Send a message via AIM to merc3des
Default

Yea this inspired me to get an airbrush and start painting. I'ma start with solid colors and then try this!
__________________
Feel free to ask me anything Xmods related. Chances are I know the answer, or can tell you someone that does.

Mercedes Track Car v2 (50% finished) :
http://www.xmodsource.com/forum/showthread.php?t=18360

Comeback Supra Project (trust me tune in):
http://www.xmodsource.com/forum/showthread.php?t=20546
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.