AAA button top lith's???

[94exa2]

i just noticed that atomic replaced the flat top aaa liths with button top aaa liths

what all would i need to run these?

i read on their site that you need this and that and that....but isnt there like a "kit" that i could buy to used these?...i dont wanna making a charging rack then buy there charger then buy their charger adapter etc....

[94exa2]

13 views and no-one has any insite on these lith AAA's?

[XMDrifter]

please don't double post.
anyways, the aaa's you'll need to modify the battery tray slightly because the buttons are a bit wider. and it has to be run in a 2s2p setup
and no, there's no kit.

[94exa2]

but would running these be pretty good?
i dont know that they'd be better than li-poly packs or anything, but wouldnt it be a good upgrade from nimh aaa's?

[lol]

If You Just Put Them Straight In Your Xmod Expect Some Smoke

You Need To Wire Them Into A 2 Series 2 Parallel Configuration.

Diagram For Wiring 2S2P

[Skv012a]

Originally Posted by 94exa2

...i dont wanna making a charging rack then buy there charger then buy their charger adapter etc....

Then get Orion 900 mAh high output AAAs and stop complaining. Liths are overkill and hassle imo and the orions work very well. If $10 isn't too much for you, get R1Wurks matched set for $20.

[94exa2]

could i use 2 of those aaa lith's and 2 dummy batteries in the stock tray? no modification?

[imnotmikal]

As long as you don't mind losing a finger or two.

[94exa2]

huh?

[kungpow420]

you could use two liths and two dummy cells it would work just fine

[TripleXmodder(akaXXX)]

but it wouldn't be any big difference from 4 nimh cells so whats the purpose.

EDIT: I meant that the run time would be so low it would be rediculous. Correct me if Im wrong.

[94exa2]

so really the only good way to use these aaa liths is 4 in a 2s2p?

[TripleXmodder(akaXXX)]

Right because the AAAs are only 320mah, So your run time would be half of that of 2 AA liths. The only good application for these would be to modify your battery trays and use 4 of them.

[94exa2]

so i CAN use these aaa liths on my evo, with stock battery tray(re-wired of course)? i want lith's that i can keep my underglow with

and i dont care if its not AS powerfull as li-poly, i just want a lil more power than 4 ni-mh, last longer than ni-mh and keep underglow...

[TripleXmodder(akaXXX)]

Originally Posted by 94exa2

so i CAN use these aaa liths on my evo, with stock battery tray(re-wired of course)? i want lith's that i can keep my underglow with

and i dont care if its not AS powerfull as li-poly, i just want a lil more power than 4 ni-mh, last longer than ni-mh and keep underglow...

Yes you can, don't get stuck oh lipo being faster then Li-ion. you won't notice the difference, you'll just see the car is insane fast either way.

Yes you can modify the tray for these AAA lith cells and use your underglow with it. Actually if you PM me I can do it for you if you don't know how. PM me. For the same price of buying the cells yourself I can provide the cells, modify the tray and install them.

[94exa2]

would i need 2x2 fets with these?

[TripleXmodder(akaXXX)]

no. You don't need to stack any FETs when you add liths. FET stacking is determined by the motor your using.

[dontspamme]

For using 4 AAA Lith-ions? Nope. Just don't run high gearing.

[94exa2]

idk if im "gravedigging" or not, being as i started this thread and still curious on its topic (tell me if im breaking some rule here)

so anyways, would one expect the same power with 4 aaa liths as with 2 aa liths/ li-po packs?

would one expect the same run-time with 4 aaa liths as with 2 aa liths/lipo packs? or would i be better off(performance wise) going with 2 aa liths/lipo packs?

(im trying to figure out if i want to run stock chasis with the RS underglow(be easier and cheaper) with 4 aaa liths....

or use a stilleto(or similar chassis) with some form of custom underglow(any suggestions here?) and aa liths/lipo packs(is there ANY upside to running lipo over lion if using a stilleto chasis?)