|
|
|
#61
07-24-2010, 12:19 AM
|
||||
|
||||
oooooh, I see now, I was also like "those colors seem awfully familiar" lol
__________________
7mm front suspension travel from my EVO!!! see how I did it here! http://www.xmodsource.com/forum/show...342#post249342 
|
|
#62
07-31-2010, 03:19 PM
|
||||
|
||||
|
lol
well guess what i got  yep.. the package is herei made the shocks last night.. and they are amazing i still have some money left over, because i didnt get an esc, my cousin might be getting a new esc, and i might be getting his old one (he has the rc4wd mayhem.. old version of the outcry) anyways... lets see some pishurs   wooooooo shocks!!!!!!!!!  turnbuckles for my rc18  i ended up ordering the wrong screws... i was supposed to order 2.5x6mm screws... i ended up with 3x10mm screws.... smart me...  OIL!  i bought taht for my bro's rc18  size difference  ITS ALIVE!!!!!!!!  i put the smaller abttery tray back on.. the bigger one will only be used for scale meets when we drive for more than 2 hours     EPIC   sexy shot comments and questions are welcome
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software  Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#63
07-31-2010, 04:54 PM
|
||||
|
||||
|
cOol stuff
__________________
Project Xtreme MY LOSI MRC http://www.youtube.com/user/Bulletsrain?feature=moby NightCrew
|
|
#64
08-01-2010, 04:50 PM
|
||||
|
||||
|
thanks
i extended the rear shaft.. last night before running it, its held together by super glue, because i didnt have epoxy, but once i get some epoxy... ill add it over the super glue for extra support  some thread lock wont hurt 
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#65
08-05-2010, 12:40 AM
|
||||
|
||||
|
some more insane flex shots after i cleaned it up front a couple runs(my sister stole my camera, so i couldnt get any while running
 )      enjoy! comments and questions are welcome
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#66
08-05-2010, 02:49 AM
|
||||
|
||||
|
Nice, looks like just the right amount of flex.
__________________
Project Xtreme MY LOSI MRC http://www.youtube.com/user/Bulletsrain?feature=moby NightCrew
|
|
#67
08-05-2010, 03:29 PM
|
||||
|
||||
|
i love the flex
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#68
08-14-2010, 12:17 AM
|
||||
|
||||
|
i got a couple videos of it and some pishurs
    The first video is 3rd person view The second is 1st person view from the rear bed The third is first person view from the front bumper and yes, you see me multiple times in all 3 videos    enjoycomments and questions are welcome!
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#69
08-16-2010, 03:31 PM
|
||||
|
||||
|
Grr..... i h8 spur gears.. and bad mesh..
 
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#70
10-01-2010, 06:37 PM
|
||||
|
||||
|
one giant arse update:
a) Can a mod change the title of this thread to "Rusty's Honchablo" ty! b) update time well, a recent invite to a gathering to a crawling place around here gave me a reason to spend some money on this baby... in a recent trade, i got a losi crawler brushless system, i used it for the trail run, and i hated the **** out of it, so that's out, back comes the tekin, and soon a new esc i need thoughts on the Holmes Hobbies Torquemaster XL.. some say its the best, is this true? before you ask, i went to Vasquez Rocks, and if it wasnt for the invention of bottled water, i would not be typing this right now, i was literally in a desert, with 1 bottle of water for about 2 hours and all the guys started to "die" from the heat, lol PISHUR TEIM some shots were taken just for fun, just to play around with my new camera                                       enjoy
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#71
10-02-2010, 02:03 AM
|
||||
|
||||
|
hmm, my email says there was a reply, but i dont see one, but ill answer it anyways:
this one, in total,(including the car itself) would cost around $550ish(not including the radio system)
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#72
10-09-2010, 01:00 AM
|
||||
|
||||
|
thank you big brother
he got it for my bday and it came today      soldering was OK, but after this burn, i dont think touching a hot pan that come out of the oven is that bad imagine your finger, touching about 450 degrees of pure heat for about 50 milliseconds it doesnt seem that bad, but ill take a picture after it stops stinging and hurting, to show the color change from unfried skin to fried skin  enjoy
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶ Last edited by mycrors4; 10-17-2010 at 12:30 AM..
|
|
#73
10-17-2010, 12:35 AM
|
||||
|
||||
|
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#74
01-08-2011, 12:44 AM
|
||||
|
||||
|
small update
Cleaned it up a little, drove it, and since i got the airtronics mx3x for my sc10, i move the gt2 reciever over to this car    and some flex shots(testing out new camera software on my phone), sorry if they are crappy
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#75
04-28-2011, 05:44 PM
|
||||
|
||||
|
woah, been a long time since ive updates this thread.... the first quote is from 3/20, second is today's update
Quote:
Quote:
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#76
10-15-2011, 01:42 PM
|
||||
|
||||
|
teaser update:
til i get the rest of the parts.. here's a teaser that might give away what im getting   
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#77
10-15-2011, 03:57 PM
|
|||
|
|||
|
Alloy C-hubs, alloy knuckles.
__________________
|
|
#78
10-15-2011, 04:19 PM
|
||||
|
||||
|
nope
ive had those from the start... the ones in the package are slightly different.. take a closer look at em
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
|
#79
10-15-2011, 08:03 PM
|
|||
|
|||
|
Only thing I can think of is high clearance knuckles.
__________________
|
|
#80
10-15-2011, 08:04 PM
|
||||
|
||||
|
Quote:
think the opposite of that
__________________
Any questions about 1/18 and bigger scale r/c? I'm just one Private Message away Check out my B/S/T Thread Want remixes of some songs... PM me.. I has DJ programing software Inventor of the idea of using Bob Saget to name R/C parts ٩(-̮̮̃•̃)۶
|
 |
| Currently Active Users Viewing This Thread: 6 (0 members and 6 guests) | |
|
|
Linear Mode
