Fet Need Help

[Darkmagik]

Hello i have a problem i atempted to do a 2x2 staked Fets for the evo chassis and like always something has to go wrong when i solder something. i want to know which models go where exactly. I did the soldering properly i think i misplaced the FETs not sure. I plaed the one with the 90 on the left and the other on the right plz help.

[streetballerzz3]

hope this helps:

http://www.atomicmods.com/custom.aspx?id=18

[Darkmagik]

nope i did the upgrad on the EVO not gen 1 but thanks for your help. I still dont know where each FET goes

[streetballerzz3]

oh sorry heres one for the EVO:
http://www.jawdropracing.com/fetsinstall.html

[Darkmagik]

io still dont know which one goes where i got how to put them in but idk which fet goes where. thankyou street for the tutorial.

[j_meneskie]

Okay when doing the FET upgrade when you are looking at the FET closest to the motor that one is the 7329 FET; and the one closest to the front of the car is the 9910 FET. I hope this helps you out and i also hope you didn't fry anything in the proccess of doing this the first time. BTW how many Watts is the soldering iron you are using? You atleast want 30 Watts because if it isn't atleast that high all that will happen is you will fry parts on your electronics main board because you will overheat things.

[Darkmagik]

Yea i did that but do i need to leave space between the legs that are closest to the motor wires?

[#1_05mustang]

no you solder them in pairs.

[Darkmagik]

Thank you i am about to remove some of the soder so i can see if it works.

[#1_05mustang]

you dont need to remove any solder just and a drop of solder to make em into pairs.