Go Back   XmodSource.com > Xmods > XMOD Modification
Register FAQ Members List Calendar Gallery iTrader Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-22-2007, 04:34 PM
TheB1GDude's Avatar
TheB1GDude TheB1GDude is offline
ROTFLSHMSFOAIDMT
 
Join Date: Sep 2006
Posts: 3,104
Trader Rating: (24)
Send a message via AIM to TheB1GDude Send a message via MSN to TheB1GDude
Default How-To: Another Truck Lift Tutorial

Hi,

So I have really been trying to get into Xmod trucks - mainly because nearly all of my Xmod cars are currently broken - so a few weeks back I got myself a Titan starter kit which I converted over to a blue F1-50 with the upgraded body parts which I then put all the RS parts into but it still didn't cut it as an off roader!

So I started thinking outside the box and looked through the How-To section of the forum, I did the getto swampers mod as posted by Sweed:

http://www.xmodsource.com/forum/showthread.php?t=8385

I was really impressed about how much more grip I got from the tires but then found that I could hardly drive an inch before the wheels got stuck, so I started sanding the inside of the truck down but it still just was not cutting it!!

I remember seeing on eBay a part you could buy called the Overland Lift Kit that gave the truck a crazy lift, I figured this was the easiest way for me to fix the problem of the tires rubbing but I couldn't find one to buy!

So again I went back to the How-To section and I looked at the lift modifications, there where a bunch of cool ones but I didn't have some of the parts required to do them, so I figured I would just wing it and write a tutorial as I went!

I am going to give credit where credit is due and say that is this tutorial is loosely based on some of the steps in the following sticked tutorial:

http://www.xmodsource.com/forum/showthread.php?t=3379

So thanks kuecker_dj09 for the inspiration - however your pictures now seem to be missing!

I am still working on making my version of the tutorial 100% complete and understandable, I also want to have a good set of step by step photos as some of the steps you need to see to do!

Hopefully though the following should get you to the same point as me:

1. First step is always the easiest! So unscrew the blue front body clip flip it over and screw it back in! The front of the truck is now lifted - cool!!




2. Unscrew the grey rear clip from the blue body mount and put it to one side.

3. Unscrew the blue clip mounting point from the body shell.

4. Get 3 gen1 yellow wheel bearings and glue them over the screw holes of the blue piece that screws onto the body.



5. On the grey body clip file down the little pointy bits of plastic that are used to line this up to the blue piece.

6. Take a gen1 yellow engine mount and glue it onto the top of the grey clip, this is what gives you the rear lift, you may also want to put a screw through this whilst the glue settles.




7. When the glue is dry drill two holes through the top of the yellow engine mount, line it up on top of the blue mounting piece and continue to drill, this will give you holes through the yellow engine mount and the blue body mount that you can screw through to hold the while thing together.



8. At this point you should have a tower like structure that will lift the truck by about an inch which luckily is that same height as the upside down from clip!



9. Let the glue dry!

10. Whilst the glue is drying you need to find three long screws from a gen1 car - these are usually what holds the front and rear top deck plates in place, you are going to be using these as the new screws for putting the custom lift kit back into the truck.



11. Screw the custom lift back into place.

12. Mount the car back on the body - assuming that all you screw holes where in the right place and that the parts you glued went on straight it should be as snug as if this was a stock part!



What I ended up with was this:



If no one minds I will link to the tutorial as it is on my personal web site:

Click Here

Let me know if you have any questions.

Next for the truck will be a 6-cell and then Super Swampers!
__________________
Thanks,
The B1G Dude (XMS Administrator).
Team X.I. Member.



Duct Tape is like the force:- it has a light side and a dark side and it binds the universe together.....

Last edited by TheB1GDude; 05-22-2008 at 09:14 AM.. Reason: Added Pictures
Reply With Quote
 


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.