#1
|
||||
|
||||
My Mini Revo
*Not from BYT* Yup guys I'm back but first here's my new little guy
*Copied directly from my thread on BYT* Got it today though my LHS charged $300 I brought in Stormerhobbies' price and got it for $275 from my LHS. They must like me :P. But anyway also walked out with a Tenergy battery combo pack but I didn't walk out with a series connector, they didn't have any. So they are gonna make their own and give um away or charge a dollar or two. But first impressions, this thing is fast. Tried it out front of my Poppi's house(grandpa) and its sure fun. Ran 3 packs like that. Wheelies on command, got some dirt in the front bumper so ran through a puddle a few times to wash it off. Man is this fun, did some stoppies, tons of wheelies, and ended up on its lid multiple times. Video should be up in a few hours though I didn't have a camera person and it almost got ran over by my friend's mom haha so the camera got put in the grass! But anyway a size comparison to my MLST2 if anyone wants to see more size comparisons like to my Slash, Nitro Pede, anything.. Feel free to ask. All the pictures were taken right before the 4th and 5th runs in front of my house or in my room. The indoor pictures may be bad or shaky because of bad lighting and i forgot to put on dual image stabilization. Enjoy! Update June 22 2009, video is here, check it out and watch in HD http://www.youtube.com/watch?v=aKM1R0jpfvg
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 Last edited by Stampedekid; 06-22-2009 at 12:06 PM.. |
#2
|
||||
|
||||
Awesome! I've been eying one of these myself, just don't have the funds. Lol.
Is that a SubC or 2/3A NiMH pack?
__________________
XMS Rules & Guidelines | B/S/T Rules | How To Post Pictures Greyscale Racing Member
The Collection: Mitsubishi Pajero | AE RC18MT TLMicroCrawler | Xmod ShowRoom | 'Yota XTruck "The fun begins when the pavement ends." |
#3
|
|||
|
|||
whoa! never even heard of hte mini revo yet lol. what scale is it?
|
#4
|
||||
|
||||
Traxxas' claims it is a 1/16th.
__________________
XMS Rules & Guidelines | B/S/T Rules | How To Post Pictures Greyscale Racing Member
The Collection: Mitsubishi Pajero | AE RC18MT TLMicroCrawler | Xmod ShowRoom | 'Yota XTruck "The fun begins when the pavement ends." |
#5
|
||||
|
||||
Quote:
1/16 as Donzii said. Yeah its only been released to the public, well shipping for a week or 2. I bought the first Mini Revo at my LHS. They didn't have enough to open them up but they had opened up a Slash and thats how I knew I had to have it. Video is uploading soo should be up soon. I did a lot trying to get it to grip but after the tranny broke in, now i cannot keep the front end down. I cannot even imagine when my series connector comes Quote:
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 |
#6
|
|||
|
|||
That rig is awesome. I have been keeping an eye on this product for a while. It is on the top of my list of r/c's to get. I have lots of fun with my xmods but this truck is just awesome. Brushless, fully waterproof and upgradeable to lithium power - how can it get better? I look forward to videos and your opinion on this rig, especially the waterproof-ness.
|
#7
|
||||
|
||||
Very nice man. I want one my self just some problems with the late model came first. Clear outdoor pictures. I wish i could do that, lol. The Losi mini Late model(1/18th) is bigger than the revo. The wheels base it .1 inches bigger and something longer. That says how big the late model is.
|
#8
|
||||
|
||||
Quote:
Quote:
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 |
#10
|
||||
|
||||
Yup they are. Hopefully LIR will start a Mini Revo Class so I can race this bad boy. Status report from the 45 minute bash(3 batteries), this thing has too much power on just 1 six cell pack. Flipped onto its lid numerous times from wheelies past the wing and in the end lost 2 body clips, the front ones(go figure) lucky me I have extras..I think..yeah I do. Also I thought of you guys, got some more video, more wheelies and some puddle bashing but i did end up soaking the camera so part of the video(about a minute) is me drying off the camera
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 Last edited by Stampedekid; 06-22-2009 at 12:07 PM.. |
#12
|
||||
|
||||
Only thing is its not classified as 1/18 but 1/16 Bigger as you can see compared to a large 1/18 truck.(MLST2 is bigger than RC18 series vehicles/knockoffs such as pro pulse, Mini E-Revo VXL towers over both.) But yeah it definitely rips. I might need to get the Center Differential to help keep that front end planted especially after I get the series connector or a 3S.
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 |
#14
|
||||
|
||||
Grand National actually. New video up. Dontspamme its the one I was telling you about
http://www.youtube.com/watch?v=nCUQU2umSms
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 |
#15
|
|||
|
|||
Quote:
|
#16
|
||||
|
||||
Oh ok. Well tomorrow says death to my non-working pro pulse. Mini Revo with string tied to the wing then to the front bumper of POS non-working 1st gen Pro Pulse t100 and possibly some Nitro Stampede's(mine and my friend's), My BL Slash, and I think that's all thats running.. I'll be sure to get some video. It rained before and the street is soaked but I'm not sure I don't want to drive it in rain...yet..
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 |
#17
|
||||
|
||||
Well here is the result of 12 cells(2 6 cells in series), happened once earlier but I fixed it, this time its mulched. Time for a trip to the hobby shop. The reason the u-joint is glued is to prevent the ball joint from popping out, used CA glue.
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 |
#18
|
||||
|
||||
Time for some much needed alloy drive-line components.
__________________
XMS Rules & Guidelines | B/S/T Rules | How To Post Pictures Greyscale Racing Member
The Collection: Mitsubishi Pajero | AE RC18MT TLMicroCrawler | Xmod ShowRoom | 'Yota XTruck "The fun begins when the pavement ends." |
#19
|
||||
|
||||
Donzii I don't even think they make them. My lhs is having a hard time getting in the stockers, all on backorder so I guess I won't be running this for a while..unless I run RWD but I'm not sure LOL. I'm sure they have an extra somewhere. Got part of the driveline, the part from the tranny but the part going from the front diff they didn't have.
__________________
Brushless RC18T, Brushless Micro DT, Midwest AeroStar .20, SCX10 Honcho, Duratrax 1/5 Firehammer MT, Traxxas Nitro 4Tec 3.3 |
#20
|
||||
|
||||
Is the item(s) pictured the only thing that's broken? If so, that's just a common universal joint. I'm fairly certain with enough ingenuity you could use one from the common Vendetta, RC18 or other close scale RC. However, I'm sure it won't be long before MIP, GPM or Atomic have an upgradeable aluminum u-joint. Never the less, it always sucks to have someting break...
__________________
XMS Rules & Guidelines | B/S/T Rules | How To Post Pictures Greyscale Racing Member
The Collection: Mitsubishi Pajero | AE RC18MT TLMicroCrawler | Xmod ShowRoom | 'Yota XTruck "The fun begins when the pavement ends." |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|