#1
|
|||
|
|||
help dont know the problem
ok guys i have my xmod 370z with the 2s lipo and gpm parts and locked diff with a problem.....first the motor has been got extremly hot and smeltnlike smoke with a heatsink...so i let it sit for about 2 days and now when i went to use again there was only reverse and steering and the car wouldnt move foward i tried different motors and everythimg...is this a board problem or is my diff not catching?????plz help!!! btw board is a stock street
Last edited by ae86boy; 06-21-2011 at 12:13 PM.. |
#2
|
||||
|
||||
sounds like the throttle FET have gone on the board.... if ou can take a picture of the board that would help
NSX
__________________
PS3 gamer tag : OxG33K_BunNYxO Hardstyle Republic U.K "Now This Is Real Music" NoiseControllers Headhunterz |
#4
|
||||
|
||||
Sounds like you overworked your FETs, with the increase power of lipo and the locked diff. Any type of binding in your drive line, would easily turn the FETs into smoke when running lipo.
|
#8
|
||||
|
||||
What? The green board might not but more prone to frying? hahah
|
#9
|
|||
|
|||
Quote:
if the board that you fried your fets the first time was green then you may be able to use the street board (street boards are blue). the green boards were more prone to frying, but if the board you fried was blue then you will most likely blow the street board. and if the board youy fried was green i said you MAY get away with running the street board, but dont get ****y with me if you blow it too. lithium is propably the absolute worst thing you can do to the electronics in an xmod. so does 4G63 approve this message?
__________________
XBL Gamer Tag : Roar Pants |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|