#1
|
||||
|
||||
hot truck!
ok i need help (again). wat should i do? after in stalling a 6 cell in my truck and putting the tires to fit i ran it for 10 min then i smelled somthing and figured out it was tape. then i burned (yes burned i have a blister on my knee) because my motor was hot. wat should i do? new fets? stronger motor? heres a pic of the truck
__________________
|
#2
|
||||
|
||||
If the tape was touching the motor and the motor was so hot that could be the smell....do you have an metal heatsink? I know if you get hung up on something and set there trying to go....with locked diffs things get hot pretty fast.
My poor nikko hummer died on me in a puff of smoke when the motor got hot....or maybe it short circuited....hmm....
__________________
Project Xtreme MY LOSI MRC http://www.youtube.com/user/Bulletsrain?feature=moby NightCrew |
#3
|
||||
|
||||
no it was the wire got hot i didnt out black tape it i was bacicly doing a test drive to see if it would work but where i soldered the wires it got hot that was the smell and i have a metal heat sink on the motor
__________________
|
#4
|
||||
|
||||
Maybe you soldered something wrong? That could be likely.
__________________
Project Xtreme MY LOSI MRC http://www.youtube.com/user/Bulletsrain?feature=moby NightCrew |
#5
|
||||
|
||||
idk not that hard to solder two wires together. i think i need so much power to turn my big wheels that i am trying to get so much torque that my motor is having to work really hard thus, a lot of power
__________________
Last edited by 65mustangrock; 08-23-2008 at 04:00 PM.. |
#6
|
||||
|
||||
Your overworking your motor. If your running a stage two outdoors on assorted terains, it really puts strain on the motor. It could be your gearing, or it could be that you have a heavy throttle finger...
Later, RedSXmodder |
#7
|
||||
|
||||
double check all your connections and then if nothing make sure your motor heat sink is not tight make it a little loose
|
#8
|
||||
|
||||
Check your solder quality. The solder may be going back into that wierd state if it gets too hot. Those tires look big, and with the terrain, it may just be the motor. RS motors can only handle so much. I had a puff of smoke come out of a motor once, and a wierd smell, turns out i burned the brushes, then I burned myself. I got the neighbors ****ed with all the curses,
__________________
Feel free to ask me anything Xmods related. Chances are I know the answer, or can tell you someone that does. Mercedes Track Car v2 (50% finished) : http://www.xmodsource.com/forum/showthread.php?t=18360 Comeback Supra Project (trust me tune in): http://www.xmodsource.com/forum/showthread.php?t=20546 |
#9
|
||||
|
||||
ok thank guys so wat now? should i get a stronger motor, or stacked fets? or both? and tires that are a little lighter would help cause i dont think my truck should take a long time to get up to speed.
__________________
Last edited by 65mustangrock; 08-23-2008 at 08:59 PM.. |
#10
|
||||
|
||||
Quote:
+++You can keep the monster tires lol
__________________
Feel free to ask me anything Xmods related. Chances are I know the answer, or can tell you someone that does. Mercedes Track Car v2 (50% finished) : http://www.xmodsource.com/forum/showthread.php?t=18360 Comeback Supra Project (trust me tune in): http://www.xmodsource.com/forum/showthread.php?t=20546 |
#11
|
||||
|
||||
Quote:
I'd recomand you the tamiya universal gearbox or the hs-81 servo instead. |
#12
|
||||
|
||||
i dont want to because i would like to keep it like a half and half truck, so i think really wat i need is a stronger motor and lighter tires
__________________
|
#13
|
||||
|
||||
i dont really get wat you mean. half and half truck
|
#14
|
||||
|
||||
not completlely a crawler but not totally a super fast truck
__________________
|
#15
|
||||
|
||||
ohh then get a radline motor
|
#16
|
||||
|
||||
ok thanks for your help
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|