Trailer hitch tutorial

[123Vette]

Here is what you'll need.



Step 1: First take the marker and mark the center of the flat area on the bumper.



Step 2: Now drill a hole there with the smaller drill to start.





Step 3: Now widen this hole the bigger one.





Step 4:Now insert the gen 1 acel stub into the hole.



You may have to do it this way depending on the height of the truck.




Step 5: Now screw the lug nut onto the acel stub.



And there you go.



Here's how to do it on a hummer.

You will need.



Step 1 Hummer: Drill the reciver hole out with ONLY the sm. drill





Step 2 Hummer: Mark the back of the metal or plastic peice and drill it with the sm. drill ONLY.





Step 3 Hummer: Now attach this piece with a short screw and lug nut.





Now follow steps 1-5 as if this were a truck bumper!!






Here is my truck, i wired the trailer up with lights for a realist touch, the trailer is part of a
Wal-Mart Model (most people use this one)For mine i use a triangular piece of plastic to make it turn better, look better, and for a place to incoprerate a plug for the lights. In order to make it the way i did on my titan is very easy, just do that same thing 2 times once the bumper to the piece of plastic , but use a short screw so it is tighter and doesn't wigle around, and then 1 more time the plastic to trailer.