My mini-t

[supraracer]

well i found a mini-t on RCU and bought it so it should be here soon.
theres no electronics, but im going right to a brushless system anyway so this is kinda what i was looking for.
cf rolling chassis for 55 shipped
PICS
http://s110.photobucket.com/albums/n...rent=mini2.jpg
http://s110.photobucket.com/albums/n...rent=mini1.jpg
http://s110.photobucket.com/albums/n...rrent=mini.jpg

But now i need some help, im going with a mamba 5400kv system, so im looking for advice on a new reciever and radio. i want something decent but i do not need anything top of the line.

any help is appreciated
thank you
justin

[Donziikid]

I run the stock radio system in my RC18MT and it doesn't glitch a bit. Many will tell you that stock radio systems (AM especially) isn't good when running brushless, but I have experience no glitching, clogging or anything. But, I'm sure I'll experience that sometime.

What would be safest would be to go with some sort of FM radio system or if you have the money, 2.4GHz Spektrum.

Futaba 2PL: $84.99.
Futaba 3PM: $109.99.
Airtronics Spread Spectrum MX3: $179.99.
Spektrum DX2.0: $169.99.
Spektrum DX3.0: $249.99.

As you can see, FM is quite a bit cheaper than the spread Spectrum/Spektrum radios, but, with price comes quality and reliability.

[supraracer]

this might sound dumb but im just getting into hobby grade electronics after having been in xmods for a couple years.

so with the Spektrum DX2.0: $169.99. that will include an radio and reciever?

And if i order the Mamba 5400kv system(motor and ecu) and the spektrum i will have all the electronics i need.

Sorry just a really big noob with this stuff

[Donziikid]

Originally Posted by supraracer

this might sound dumb but im just getting into hobby grade electronics after having been in xmods for a couple years.

so with the Spektrum DX2.0: $169.99. that will include an radio and reciever?

And if i order the Mamba 5400kv system(motor and ecu) and the spektrum i will have all the electronics i need.

Sorry just a really big noob with this stuff

Everyone starts somewhere, you don't sound dumb.

If you order the Spektrum DX2.0 for $169.99 on HorizonHobby.com, it will include the transmitter and the receiver, as well as two different servos (a Z270 Standard Race and a Z590 Torque Race). If your MiniT already came with a servo and a battery, then you're set to go. Just drop in this radio system and the mamba 25 combo and off you go!

With the Mamba 25 combo you will get both the ESC and the 5400kv motor. But, you could also just buy the ESC or the motor seperatly. So, be careful when making that purchase.

If you have a servo already and a battery already, then you're good to go after you purchase the radio and the mamba system.

[supraracer]

Thanks alot Donziikid,
yea there is no servo so im glad one comes with that
ok so the next thungs im purchasing are
Spektrum Dx2.0
Mamba 25 combo

and it comes with a battery pack but its only a 6 or cell nicad so im gonna get some 2 cell li-po packs for it

then replace broken parts as i go

[Donziikid]

I can bet your differential is going to be the first thing to go. Also, I believe the MiniT uses a 1:18th scale servo (like the Hs-55), the servos' that come with the Spektrum DX2.0, I believe, are 1:10th scale servos; so they wouldn't fit without modification.

I'll let someone who owns a MiniT chime in here.

[snowboi1289]

Go with the Airtronics Spread Spectrum MX3,I've heard good stuff about it on different rc forums..

[stang_racer]

hey if you ever decide to sell that mini tell me i want it lol

[supraracer]

http://www.jrradios.com/Products/Def...dID=JRPRS30027

hey i was wondering if this is a good reciever for the mini-t paired up with a JR RX3i

[2wdpancar]

I wouldn't doubt JR quality, they make very nice rx's and tx's, got one on my 1/10th, so nice, no glitches.
Very user-friendly.

[Most_Wanted]

Originally Posted by supraracer

http://www.jrradios.com/Products/Def...dID=JRPRS30027

hey i was wondering if this is a good reciever for the mini-t paired up with a JR RX3i

To be honest, I wasn't positive if the synthesized receiver would work with the JR XR3i, so I tested my RS310 with my XR3i and found out that it seems to work just fine.

Just to make sure, you do realize you would need the 75 MHz version?

[supraracer]

http://www.rcuniverse.com/market/item.cfm?itemId=380585

well thats why i was asking and it is the 75 version

[Most_Wanted]

Originally Posted by supraracer

http://www.rcuniverse.com/market/item.cfm?itemId=380585

well thats why i was asking and it is the 75 version

Yes, that's the receiver that comes with that particular radio, so no problem there. Little steep on the price though, I think you can probably find it cheaper considering I got the newer version for $85 shipped (and I'm in Canada) which was actually a superb deal but I would say you can get that one for $90 shipped in the US.

I'm going to send you a PM with a couple places to check out for used RC stuff.

Cheers,
M_W

[supraracer]

well i got this rolling chassis awhile ago but then ran into to some finacial problems but its back on now, i ordered the Spektrum DX2.0, mamba 8000k brushless system, hs-55 servo and sevo saver.

Now im looking for a li-po pack that i should use for this, im looking for max speed not run times. Also looking for another one that is more for longer run times.

One last thing, hwat gear ratio would i want for this car, looking for more acceleration then top speed.

[fieldfairy2]

Sounds cool.

For the gear ratio thing: put the pinion gear on top and the spur gear on bottom. 9/24. Divide the two numbers =0.375 the lower the number means more torque/acceleration, the higher number equals more top speed. So basically you want the lowest number possible for acceleration, but no top speed. on an xmod 8/25 is the most torque/acceleration you can get.Hope this helps.

As for every thing else. I have no idea. i just got into the micro dt not mini t. lol