|
|
|
|
|
#1
03-12-2007, 11:15 PM
|
||||
|
||||
Motor official info: read before you ask!
Alright, since I think I've seen more than 3 threads asking pretty much the same questions, I think I'll clarify things up a bit. PN makes **** fine motors, and AM sells them. I can only imagine the countless emails they've gotten asking simply answered questions.
The lingo: BB (ball bearings) aramature (rotating shaft inside motor) brushes (brushes are what connect to the comm and get current into the armature and windings) comm (on the end of the armature, sends current from the batteries into the windings on the armature) I've rated these motors in my opinion from 1-10 PN Racing Speedy 05 motor: Does not require upgraded FETs Uses standard can and brushes Is SLIGHTLY better than a stage 2 motor 4/10 PN Racing MiniZ MA010 special Does not require upgraded FETs Uses standard can and brushes Is SLIGHTLY better than a stage 2 34,250 RPM @ 6v (this motor, although it says miniZ will work in an Xmod without any custimization) 4/10 PN Racing Saber modified motor requires at least a 2x3 stack of FETs or V2.2 Uses a 35t armature Neo mags Ball bearings puts out 38,560rpm @ 6v 5/10 PN Racing SO3 motor requires at least a 2x3 stack of FETs or V2.2 Uses a 39t armature ball bearings Neo magnets puts out 36,300rpm @ 6v 5/10 PN Racing SO4 motor Requires at least a 2x3 stack of FETs or a V2.2 Uses a 35t armature Ball bearings Neo magnets a balanced armature puts out 39,000 RPM @ 6v 6/10 PN Racing Anima motor Requires at least a 2x3 stack of FETs or a V2.2 Uses a 33t armature Neo Magnets ball bearings balance armature puts out 37,200 RPM @6v 5/10 PN racing Macho AWD motor Requires 2x2 stacke FETs puts out more torque than standard motors and is great for AWDrivers 4/10 More motors: X-2 lightspeed pro edition requires Nelly or V2.2 Uses 22g silver wire Uses larger rotor for more torque Highest quality Neo Mags upgraded carbon brushes ball bearings prelubed with Tribo comm lube puts out a whopping 64,045rpm @ 4.8v! 9.5/10 *This motor is ridiculous. Speeds reaching over 50 are just the beginning of the list of pro's of this motor X-2 lightspeed requires Nelly or V2.2 Uses a 22g spiral armature Uses highest quality Neo Mags carbon brushes (standard) prelubed with Tribo comm lube puts out rpm and torque slightly less than the pro edition 9/10 *Another insane motor. This thing could make an RC18t go... X-1 super speed uses stock FETs, although stacking is reccomended Uses a ball bearing can Uses Neo Mags Uses performance can and endbell high conductive carbon brushes 7/10 High standard v3 Does not require upgraded FETs Silver brushes Neo mags performance can and endbell ball bearings 6/10 RT-1 modified motor Does not require upgraded FETs carbon brushes balanced armature ball bearings 5/10 RT-2 modified motor Does not require upgraded FETs Ball bearings balanced armature Neo mags siver brushes 6/10 Atomic Z2 High Current Motor requieres upgraded FETs 2x3 or V2.2 or Nelly balanced armature Neo Mags Positive brush is silver, while the negative brush is carbon open endbell (atomic can) puts out 48,186 rpm @ 6v 6.5/10 (I believe this is actually a PN motor) Team Redmade Pro (FET safe) Does not require modified FETs Carbon brushes 45t 30awg arm silver FAT comm EGR BB can pre-lubed and broken it for plug and play simplicity. 5.5/10 Team Redmade Pro (non-FET safe) Requires a 2x2 stack or some sort of external FET board 36t 30awg arm Silver FAT comm EGR BB can pre-lubed and broken in for plug and play simplicity 6/10 Team Redmade Maddness Requires at least a 2x4 stack or a external FET board 17t 24awg PN racing, pre balanced arm EGR BB motor can Highest quality PN racing carbon brushes Silver FAT comm High grade silver solder pre-lubed and pre broken in for plug and play simplicity 8/10 *This motor is similar to the X-2 lightspeed, however, instead of a 12t arm, it utilizes a milder 17t arm. External Turbo Highly reccomended. Litium Ion and Ni-MH batteries may not be able to keep up with this motor, so I advise a Li-po setup. Heat sinds are nearly required on this motor. Team Redmade Super-Crazy Nelly Stacked only 17t 24awg PN Racing balanced arm M1 hobby style enbell with hard springs carbon brushes FAT silver comm pre-lubed and pre-broken in for plug and play simplicity. 9.75/10 *This is one of the most insane motors out there. With the new M1 endbell, it can easily surpass speeds set by standard cased motors. Don't be surprised if you xmod shatters upon impact with this motor. I reccomend GPM highly, becuase 60+ crashes aren't good for plastic. Team Redmade Tork requires a 2x2 stack of FETs 180 sized motor 2 sets (4) of Neodiymium motor magnets EGR syle motor case 3/10 (speed) 9.5/10 (torque) *explosive acceleration and massive amounts of torque make this the ultimate crawler motor. Team Redmade Standard Does not require upgraded FETs Standard bushing can 45t 30awg arm pre lubed and pre broken in for plug and play simplicity 4/10 Later, RedSXmodder
__________________
 Team Redmade Motors- Building Motors that rise above the rest! Rethink It All
Last edited by RedSXmodder; 09-01-2007 at 02:43 PM.. 
|
|
#2
03-12-2007, 11:17 PM
|
||||
|
||||
|
could u give me a link 2 that Macho motor?
__________________
"The Mustang's enormous success inspired Chevrolet and Dodge to create their own retro-styled muscle cars in the form of the new Camaro and Challenger." 
|
|
#3
03-12-2007, 11:19 PM
|
||||
|
||||
|
__________________
Team Redmade Motors- Building Motors that rise above the rest! Rethink It All
|
|
#4
03-12-2007, 11:44 PM
|
||||
|
||||
|
thank you so much this is awesome.
__________________
My whips: Hummer: all rs upgrades, 6cell and custom superswampers(off roader) G35: currently being repaired(dead) Mustang: all rs upgrades,blue gpm knuckles, 39 turn motor (circuit/top speed) Scion TC: all rs upgrades, drift kit and 6 cell (drifter) blue F-150 body (offroad bodykit) G35 body top targa top and some custom bodywork
|
|
#5
03-13-2007, 12:34 AM
|
||||
|
||||
|
dont know anyone with one of these macho motors do you? i have heard great things about all the rest but, never heard of macho. just wondering?
__________________
Evo VIII Suspension Tight Turns S2 motor 9-25 Metal Bearings 6-cell(lith upgrade?) GPM Possibly? Just trying to Learn AND have fun! 
|
|
#6
03-13-2007, 04:18 AM
|
||||
|
||||
|
neat-o. maybe think about putting some other brands and motors on there too, just for comparison. nice work, stickied.
__________________
Mine's faster! My for sale thread: NEW!! Check out recent discounts and special offers! THE EDJ'S FOR SALE THREAD
|
|
#7
03-13-2007, 07:26 PM
|
||||
|
||||
|
Added some more.
Later, RedSXmodder
__________________
Team Redmade Motors- Building Motors that rise above the rest! Rethink It All
|
|
#8
03-13-2007, 07:39 PM
|
||||
|
||||
|
Whats the best one for drifting but uses stock FETs?
__________________
|
|
#9
03-13-2007, 08:31 PM
|
||||
|
||||
|
for the Atomic Z2 High Current Motor it says minimun of 2x2 stack
|
|
#10
03-13-2007, 08:58 PM
|
||||
|
||||
|
Whats your point? You can't have a 2x1 stock setup to run this motor.
Later, RedSXmodder
__________________
Team Redmade Motors- Building Motors that rise above the rest! Rethink It All
|
|
#11
03-13-2007, 09:10 PM
|
||||
|
||||
|
i no im just saying you put 2x3 or v2 or nelly but it can run on a 2x2 stack
also for the x-1 super speed you put "uses stock FETs, although stacking is reccomended". For gen 1 its requires a fet upgrade or it will fry the electronics
|
|
#12
06-26-2007, 12:25 PM
|
||||
|
||||
|
can i have the link for the
X-2 lightspeed pro edition and is it better than the T2 and Z2?
__________________
"Where There's Will, There's A Way" "Many Of Lifes Failures Are Those People Who Did Not Realize How Close They Were To Success When They Gave Up" 
|
|
#13
06-26-2007, 02:47 PM
|
||||
|
||||
|
X-2 is the fastest brushed motor you could get. Way better then the T2 and Z2. Highly recommended!
http://www.undergroundxmods.com/cata...roducts_id=140 enjoy! RedSXmodder
__________________
Team Redmade Motors- Building Motors that rise above the rest! Rethink It All
|
|
#14
06-28-2007, 08:50 AM
|
||||
|
||||
|
Quote:
__________________
"Where There's Will, There's A Way" "Many Of Lifes Failures Are Those People Who Did Not Realize How Close They Were To Success When They Gave Up"
|
|
#15
06-28-2007, 08:56 AM
|
||||
|
||||
|
I believe a V2.2 will not have a chance. You'd need a stacked Nelly or something to that sort.
Later, RedSXmodder
__________________
Team Redmade Motors- Building Motors that rise above the rest! Rethink It All
|
|
#16
06-28-2007, 09:51 AM
|
||||
|
||||
|
Quote:
__________________
"Where There's Will, There's A Way" "Many Of Lifes Failures Are Those People Who Did Not Realize How Close They Were To Success When They Gave Up"
|
|
#17
06-28-2007, 02:52 PM
|
||||
|
||||
|
That is what I'm saying.
__________________
Team Redmade Motors- Building Motors that rise above the rest! Rethink It All
|
|
#19
06-28-2007, 07:39 PM
|
||||
|
||||
|
It is. But a stacked Nelly External Turbo abosolutely blows away every other option out there.
Later, RedSXmodder
__________________
Team Redmade Motors- Building Motors that rise above the rest! Rethink It All
|
|
#20
06-28-2007, 08:41 PM
|
||||
|
||||
|
Quote:
i wanted to noe cause almost all my carz have v2.2
__________________
"Where There's Will, There's A Way" "Many Of Lifes Failures Are Those People Who Did Not Realize How Close They Were To Success When They Gave Up"
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
