dogbone keeps coming out!!

[WRX Ryder]

okay this is stressing me out.i just want to drift but when i keep turning left, my front right(when facing the back) dogbone keeps coming out!! how do i fix this? i need to get drifting!!! P.S. its an evo thanks!!!

[zippo855]

you know there is different dogbones for the front and rear, there is some slight difference in length.
if thats good, there could be a couple things wrong.
1. your diff is getting wore out where the dog bone ride. you can fix this by replace the diff, or adding small springs behind where the dog bone rides in the wheel stub. this will let the dogbone set in to the diff farther reducing chances of it coming out. but dont put too stiff of a spring in there or you will loose some steering.
2. you have an issue with a cracked knuckle. if your knuckle is cracked when you make the turn it would allow the top or bottom part of the knuckle to ride out more causing a greater gap. if broken, replace or sometimes you can superglue.
3. your bushings in your knuckle are toast allowing too much axle movment creating a bigger gap again. replace with new bushing or bearings to fix.


heres a few things to look for / try. let me know if its any of these.

[123Vette]

http://www.xmodsource.com/forum/showthread.php?t=11086

should help

[babyalicep]

you can try the front versions of thes. know atomic mod sells them normly but can only find the rear right now but give u a idea.

GPM XME039R/C XMOD Evo Car Billet Aluminum Rear Axle Stubs & Captive Dogbones

Alice