Here,s a simple yet hard tut on making wide wheels
dificulty: 8/10
Things you will need:
1. Rims of your choice
2. mini torch, lighter, anything that makes fire (matches not a good idea)
3. hobby knife
4. metal xmod lug wrench or similar
5. patience
ok here we go.
its a relativity easy at first
we start by selecting a nice pair of wheels
i chose the 08 GTR wheels
then cut the fake disk brake out (only required for barricade, bumble bee, GTR and Z06 wheels)
next take your torch/ lighter, and slowly heat the center of the rim, make sure to remove tire first
quickly grab your lug wrench and slowly push the center down, be sure not to move it out of the center or to one side, its alot harder to fix
if you have done this right, they should look kinda like this
be sure to hold pressure til the plastic has hardens
after that you can paint them or just leave them how they are
so here the before and after
before wide
after wide
looks much better
i hope this helps some guys, this is best done if you have multiple wheels
one last thing, the plastic gets pretty hot, try not to burn yourselves
thanks
blue504life