Thread
:
Trailer hitch tutorial
View Single Post
#
1
06-20-2007, 10:54 PM
123Vette
New Member
Join Date: May 2007
Location: Tewksbury, Massacusetts
Posts: 991
Trader Rating: (
22
)
Trailer hitch tutorial
Here is what you'll need.
Step 1: First take the marker and mark the center of the flat area on the bumper.
Step 2: Now drill a hole there with the smaller drill to start.
Step 3: Now widen this hole the bigger one.
Step 4:Now insert the gen 1 acel stub into the hole.
You may have to do it this way depending on the height of the truck.
Step 5: Now screw the lug nut onto the acel stub.
And there you go.
Here's how to do it on a hummer.
You will need.
Step 1 Hummer: Drill the reciver hole out with ONLY the sm. drill
Step 2 Hummer: Mark the back of the metal or plastic peice and drill it with the sm. drill ONLY.
Step 3 Hummer: Now attach this piece with a short screw and lug nut.
Now follow steps 1-5 as if this were a truck bumper!!
Here is my truck, i wired the trailer up with lights for a realist touch, the trailer is part of a
Wal-Mart Model (most people use this one)For mine i use a triangular piece of plastic to make it turn better, look better, and for a place to incoprerate a plug for the lights. In order to make it the way i did on my titan is very easy, just do that same thing 2 times once the bumper to the piece of plastic , but use a short screw so it is tighter and doesn't wigle around, and then 1 more time the plastic to trailer.
__________________
Olive 2000 v70R
Last edited by 123Vette; 06-21-2007 at
10:40 PM
..
123Vette
View Public Profile
Send a private message to 123Vette
Find all posts by 123Vette