Quote:
Originally Posted by Action B
since lipo is 3.7 volts per AAA, it would have to be rewired in 2p2s. How do you plan to make the switch easy since standard Nimh are 1.5V and need to be in 4s configuration? I mean I know you can wire it up but "just pop in lipo when he wants to have some fun" is what I'm not understanding.
|
Yes your correct.. What Im planning to do is this.... Ok, the AAA battery tray on the bottom of the Xmod, You know the 4 little tabs that hold it on, that you cut off the chassis after popping the tray off so you can install Lipo.. Well.. for this mod I will first do that. 2nd.: I will keep the original tray and where the + and - wires were soldered to the tray and to the board, I will make a deans harness. 3rd I will make a second tray (using a old tray I have here.. I will cut the battery tabs out of it and reconfigure them into a 2p2s set up for 4 AAA liths. This tray will also have the deans harnes to plug it to the board. Either ttray can be swapped out just by unscrewing the 2 little screws on the bottom.. BAM done.. great questions.