this might be a repost but idk if i ever posted it in the first place
it well here it is
Ok so i was driving my titan on carpet and then it stopped. The dogbones were not in the diff.
The truck has a lift but i didnt have lift dog bones for it only stock, so the were not staying in the slots of the differencail so i came up with this.
Here is what you'll need
The truck of course
a spring from a pen, you could use and evo car spring too
something to cut the spring
and a screwdriver
Cut the spring to around half a cemtimeter length
unscrew the knuckle and take out the dogbone
drop the cut part of the sping in the cup
Reinsert the dogbone
you will notice that it should stay put if you shake it but it still moves easily when you push it
And heres the result
compaired to the other side where this wasnt preformed yet
you can see how it is barly in the diff
now do the other side, and the front if your vehical has 4 wheel drive
this can be done on a car too, but i havent ever had any slippage problems in one so i havent done it yet