help
hey need some suggetions for cooling a x-speed motor with lipos, i have the motor strap, but need more
|
remove the sticker and use some heatsink compund between the motor and cradle
it is also worth drilling the can or using a bb vented type |
You can also mount a fan on top of it and solder the leads to the motor tabs on the board or to the motor. You can do it yourself by just getting a cooling fan or they make them with mounts for the 130 size motors. Also getting the rear aluminum motor pod will work as a heatsink and absorb alot of heat... check asia tees.com or ebay for that.
Here is the standalone fan, you can pick one up at radioshack. http://www.radioshack.com/product/in...ductId=2102824 Or from the Toyz http://cgi.ebay.com/ws/eBayISAPI.dll...m=150559551804 They don't make these anymore, but you may be able to find one online somwhere or call atomicmods.. http://www.atomicmods.com/Products/X...er__10151.aspx |
All times are GMT -4. The time now is 12:34 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.