bosco72 |
05-20-2009 01:41 PM |
How to fix the evo the right way
2 Attachment(s)
For the guys that still have a little wheel wobble after putting bearings and a washer in back of the rim.With all that i still could pull the rim in and out a little bit.The fix is to take the knuckle apart and sand the front of the knuckle put the bearings and shaft back in and put the cover on and check if it still moves sand a little more.I took a pic of what part you sand.
now for the chassis if you look under the evo chassis by the steering plate cover you would see it's lifted on one side.This made my car a little crook so i took off the front of the car and saw that the piece of the chassis that holds the front on had a little square shape.All i did was sand that off and put it together.Now my car is straight and my steering has less play.I took a pic of the chassis part
|