how to make custom deep-dish rims
 

ok, i was just informed that this got deleted in the hack a while back so here it is again, here is how i make deep dish rims out of rims i already have

Things you will need:
1. set of rims to be modified
2. dremmel with cutting wheel
3. hobby knife
4. light grit sand paper
5. super glue
6. patience

start by finding a set of rims you want to make into deep dish rims, i chose the scion tc stock rims (only 2 will need to be modified)
http://i103.photobucket.com/albums/m...s/DSC05588.jpg

look for the place that you need to cut it so that it will have a nice depth but still be functional (here it is right in between the ridge and the back of the spokes)
http://i103.photobucket.com/albums/m...s/DSC05589.jpg

using your dremmel, cut the wheel at the spot previously located and separate the 2 portions (use the ridge to help guide you around the rim)
http://i103.photobucket.com/albums/m...s/DSC05592.jpg

use a hobby knife to remove any excess plastic left by the cutting wheel
http://i103.photobucket.com/albums/m...s/DSC05594.jpg

test fit the two pieces together how they will be joined, and use sand paper to even it out to prevent from creating an out of round wheel
http://i103.photobucket.com/albums/m...s/DSC05595.jpg

once the two pieces are ready, carefully glue them together, making sure they are centered with each other
http://i103.photobucket.com/albums/m...s/DSC05596.jpg

after you have modified two of the rims this way, you can add some tires and try them out :D
http://i103.photobucket.com/albums/m...s/DSC05597.jpg

if you want to take it an extra step you can always give the rims a new coat of paint
http://i103.photobucket.com/albums/m...s/DSC05599.jpg

Thanks again for putting this back up it will help alot

Thanks again for posting this up! I don't have a dremel, but my dad does.

I never saw this tut before it is a good one and that 350z looks way cool although I think the scion bk rims looked better on it.

i did this,its extremly hard to do with a razer blade..thats what i did..this will help alot of other ppls..