Trailer hitch tutorial
 

Here is what you'll need.

http://i208.photobucket.com/albums/b...e/DSC00659.jpg

Step 1: First take the marker and mark the center of the flat area on the bumper.

http://i208.photobucket.com/albums/b...e/DSC00660.jpg

Step 2: Now drill a hole there with the smaller drill to start.

http://i208.photobucket.com/albums/b...e/DSC00661.jpg

http://i208.photobucket.com/albums/b...e/DSC00662.jpg

Step 3: Now widen this hole the bigger one.

http://i208.photobucket.com/albums/b...e/DSC00663.jpg

http://i208.photobucket.com/albums/b...e/DSC00664.jpg

Step 4:Now insert the gen 1 acel stub into the hole.

http://i208.photobucket.com/albums/b...e/DSC00665.jpg

You may have to do it this way depending on the height of the truck.


http://i208.photobucket.com/albums/b...e/DSC00667.jpg

Step 5: Now screw the lug nut onto the acel stub.

http://i208.photobucket.com/albums/b...e/DSC00668.jpg

And there you go.

http://i208.photobucket.com/albums/b...e/DSC00670.jpg

Here's how to do it on a hummer.

You will need.

http://s208.photobucket.com/albums/b...e/DSC00688.jpg

Step 1 Hummer: Drill the reciver hole out with ONLY the sm. drill

http://s208.photobucket.com/albums/b...e/DSC00676.jpg

http://s208.photobucket.com/albums/b...e/DSC00677.jpg

Step 2 Hummer: Mark the back of the metal or plastic peice and drill it with the sm. drill ONLY.

http://s208.photobucket.com/albums/b...e/DSC00682.jpg

http://s208.photobucket.com/albums/b...e/DSC00684.jpg

Step 3 Hummer: Now attach this piece with a short screw and lug nut.

http://s208.photobucket.com/albums/b...e/DSC00690.jpg

http://i208.photobucket.com/albums/b...DSC00691-1.jpg

Now follow steps 1-5 as if this were a truck bumper!!

http://i208.photobucket.com/albums/b...e/DSC00692.jpg




Here is my truck, i wired the trailer up with lights for a realist touch, the trailer is part of a
Wal-Mart Model (most people use this one)For mine i use a triangular piece of plastic to make it turn better, look better, and for a place to incoprerate a plug for the lights. In order to make it the way i did on my titan is very easy, just do that same thing 2 times once the bumper to the piece of plastic , but use a short screw so it is tighter and doesn't wigle around, and then 1 more time the plastic to trailer.


http://i208.photobucket.com/albums/b...e/DSC00672.jpg

http://i208.photobucket.com/albums/b...e/DSC00673.jpg

http://i208.photobucket.com/albums/b...e/DSC00674.jpg