HPI nitro RS4 evo+
just wandering if anyone on the forum has one of these as i am looking to get one.
they seem fast enough but does anyone know how or if you can raise the suspension? because there is a cricket field with low cut grass, so with some rally tires and a higher suspension i was hoping to go over there but idk. thanks michael :) |
you change the mounting hole and it should raise it a little, or you get longer shocks which should raise it with thr right set up
"lol" had an rs4 evo2 if im not mistaking |
if you want to go rallying just get diff wheels something like tamiya baja champ ones thats what i done when i had my rs4 it raised the ride height by 1/2 - 3/4 inch the only thing you will need to worry about is the turning radius
|
i have one and they sit really low but seem like theres enough mounting holes for shocks and options for wheels to lift it a good bit and yes they are fast
|
Ah, I had the classic Super Nitro RS4 that was belt driven and a RS4 Evo III + that fuzzy has now. They're purty cool, but nitro is very dirty. Thats why I ridded them both.
|
If you want a Nitro RTR rally car why not the Kyosho DRX, it's actually built to rally they used to race them here at the track but 1/8 is starting to take over :D
http://www.amainhobbies.com/product_...w-GXR18-Engine or for Subaru fans http://www.amainhobbies.com/product_...w-GXR18-Engine Nitro was fun, I ran it for 3 years and plan to in the future but for now, 1/8 brushless conversions is where I stand. Nitro was fun for what it was and I plan to get back into it but the simplicity and insane power of brushless is what I suggest personally. |
Quote:
|
thanks anyways stampedekid :angel: but i cant order from the US because shipping adds another 100$ making that almost £450, and my birthday is to close to christmas. but i found the HPI Nitro RS4 evo+ in the UK. I can only get it with the 67?? chevvy corvette body. but that doesnt matter much because i found some new bodies, but i wanted to know if i could make the car have a higher ground clearance and put some rally tires on will it drive on a cricket field with low cut grass.?? my next door neighbour wants to get a buggy but i dont really like them or the trucks but i still wanted to take a car off road somewhere or something? but to be honest.... im confused? LOL
and one more question i read somewhere that 2.4ghz has a failsafe technology is this true or do i need to buy one? if so which is a good one to buy? as of christmas it will be going to a 2.4ghz so idk thanks michael :) |
unless you plan on going really far while driving the car, or it's very glitchy around your area, you dont need one
|
most 2.4 have a built in failsafe but if your not getting it till xmas i would still buy a failsafe to run with the am radio system till then and as for a 2.4ghz radio my lil bro has this one for a few month and he seems really happy with it ive drove his car a few times and it wortks really well
http://www.modelsport.co.uk/?CallFun...n&ItemID=36244 |
well here is the specs i copied from the website.
i dont know what some of the things mean so some help would be great :) Etronix Pulse EX3GPro Features: 2.4ghz Crystal Free 3-Channel EPA End Point Adjustment D/R Dual Rate Steering Sub trim Throttle Sub trim Servo Reversing EXP Exponential Steering Curve Adjustment EXP Exponential Throttle Curve Adjustment ABS Anti-Lock Brake System 15 Model Memory SPD Steering Speed Adjustment SPD Throttle Speed Adjustment ATS Automatic Start Feature BK-Mix Brake Mixing Function Mix Channel Function Throttle Hold Timer Function ATL Brake Effect Adjustment Servo Monitor Charging Jack |
Most advanced radios with the programming screeny have built in failsafes no matter AM, FM, or 2.4Ghz. I have an AM Radio with a failsafe built in. Anyways, if you need one, I have one new and unused. I'm just a PM away. :)
|
pm sent lol :)
|
Well i got the car for my birthday :D ill make a thread when i can get it running
but however i cannot get it to start :/ i followed all the steps in the book but im still confused :/ the glow plugs light up so its not them Engine is not flooded (Checked numerous times ) I dont think fuel is getting to the engine? I got the HPI DVD with it but it wont play on my programs i have can someone recommend one that it works on? Any Help is appreciated Michael :D |
All times are GMT -4. The time now is 10:06 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.