mystery carb...
i bought a rc car off ebay about a year ago, it was just for spares really and on the engine it had this carb...
http://i191.photobucket.com/albums/z...9/01010077.jpg its a little bit of a mystery to me....it has no high speed screw just a twisty thing and has no low speed needle at all. i need to know what this carb is for not even sure if its for a car, i was thinking its pretty much just like any other carb except you dont have to do anything to the low speed. |
did the engine have a blue head on it? i found out its a sanye engine. kinda a veryc heap knockoff, doesnt even really have a web page
that carb looks identical to the one that was on the rs4 i got. i ditched the carb as it was very tempermental getting highside set and still keep it running at idle. |
the engine was a really dirty tt pro 12 bx engine but the carb was clean apart from the little spots you can see.
|
The black plastic screw thing is the high speed needle, if you take it all the way out you will see that the end is tapered.
|
its a rotary carb, you find them on the smaller engines like the .12-.15's and mostly onroad cars.
i beilve the nitro rs4's have the rotary carbs. |
thanks but what about the lsn it doesn't have one when i look into the carb and has no screw on the side.
|
The low speed mixture may be factory set and unchangeable. Take a pic of the sides of the carb, the center of that locking nut may be your LS adjustment.
|
think this is how they are setup, if there is no screw where i put the lsn in the pic then its built in and its just a 1 needle rotary carb.
i dont know much about these carbs so dont take my word for it but this is my understanding... i dont belive rotary carbs have MSN http://i550.photobucket.com/albums/i...e/01010077.jpg |
the lsn your pointing to is just a flat base, and normal carbs have the lsn on the opposite side of the hsn base....... any way evey one i have ever had that had one..
this is just a cheapo carb. ii found a brand new .15 sanye engine on ebay, which is what is on my rs4, for like 50 bucks. |
think your right bart unchangable. all the nut does is makes it so i can adjust the throttle/brake arm.
|
yea i realize that. my friend just purchased a rs4 with a rotary carb. has the setup exactly how i have the picture thus the reason i put the stuff where it is.
every carb is different as you can tell. |
yeah, this carb is flat on each end, no screws.
thanks guys. i think this can be closed now. |
All times are GMT -4. The time now is 09:41 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.