i notice a seat diffrence too?

Minor update for future work. Met up with a forum member of 67-72ChevyTrucks.com last night at our local cruise in. (Didn't get many pics, too busy walkin' and talkin' this time). He's building up a wicked 67. Also, has a full shop, and a cab lift. He says he's got the stuff to swap a cab in less than a day... And has a few friends who will shoot paint for my truck's single stage style paint (just for color matching ease).

Badass!


http://hphotos-snc3.fbcdn.net/hs391...._7228980_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._2878956_n.jpg
http://hphotos-snc3.fbcdn.net/hs391...._6030326_n.jpg
http://hphotos-sjc1.fbcdn.net/hs371...._4108543_n.jpg
http://hphotos-snc3.fbcdn.net/hs371...._3681685_n.jpg

If all goes well, I'll have a CRX in my hands for a summer beater for the LOLGASPRICES this summer, and do some heavy work on the truck. I'd like to get the cab swap, and OD trans done this summer, and finally get some sound deadening and insulation in the cab.

And his truck:
http://i42.photobucket.com/albums/e3...t25/lowpic.jpg

We now have 1980s level technology in the drivetrain! Say hello to 200R4, 4spd automatic with a 65% overdrive and near bolt-in dimensions.

http://i42.photobucket.com/albums/e3..._5900988_n.jpg

An Art Carr rebuild kit will beef it up, electronically locking torque converter will also contribute to well improved fuel economy at higher speeds Gearing in 1st and 2nd is a bit shorter than the TH350, so it aught to be a little quicker through the lower gears, and the tall OD will put 75-80 mph at 2500 RPM, I estimate. Which is way better than the current 65mph at 3000 rpm, and cruising at 75-80 is a pipedream.

The awesome part about it? I use my stock driveshaft, stock tranny xmember (don't even need to move it), a new trans mount, and adjust the shift linkage. Otherwise, it's basically a bolt-in procedure. Hopefully it will be swapped over the thanksgiving break..

http://i42.photobucket.com/albums/e3.../Photo1339.jpg
Art Carr rebuild kit, BTO linkage and TV cable are in, just hunting for a good price for the converter and pump. An old shop foreman of my dad, and 30 year transmission guy is going to build it for free. $50 core, $270 on the kit, maybe another $300 on the pump and converter. Ooooooodles of labor saved.

Hey look... Rice!:lol:

You junk-yard hunting for the pump and converter or craigslist? Check out your local GM to see if they have any over there? How about Napa by chance? Those Autozone guys don't really seem to know what they speak of most of the time..:lol:

The pump and converter will be new. Converter will use a slightly higher stall speed, ~1800-2000rpm like the tarbo Regals. Stock pumps are some-what flawed by design (tenancy to blow out seals), and for something that's not easy to pull out and replace it's worth putting in high quality parts instead of junk yard or standard remans. The tranny is being over built for the current motor. The converter and trans will be safe for around 450-500 ft/lb of torque, more than I'll need to worry about in the immediate future.

Most importantly though, is datoverdrive.

Oh yeah. Overdrive ; Better fuel mileage when going past 60kmph for me, which would be... like 50 mph for you...:lol:

Plus, on top of things... Cruising:bigwink:

http://sphotos.ak.fbcdn.net/hphotos-..._4095778_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._7150368_n.jpg

And off to be built it goes!

-Art Carr performance master rebuild kit
-Oregon Performance lockup TC and pump (modified already with better bushings and drilled drain hole)
-B&M Shift kit
-Bow Tie Overdrive TV cable kit
-TCI lockup kit