Tralier Mod
Ok u ask for it (or aleast nitemeer said he did:-? ) TRALIER MOD :thumrigh:
FIRST GET THE SUPPLIES SHOWN(pen,heavyduty cardboard,sizzors,ruler,4 rims/tires,2 long drive shaft,super glue,and 2 straws http://i343.photobucket.com/albums/o...mods2008-1.jpg NEXT get the card board and a car chassis and mark how wide the car is,on the cardboard http://i343.photobucket.com/albums/o.../xmods2006.jpg it should look somthing like this http://i343.photobucket.com/albums/o.../xmods2007.jpg 3RD measure your car to find the lenght .if its a normal car 8 inches is enugh. but if it a model car with etended chassis , u will have to make ur own mesurments. http://i343.photobucket.com/albums/o.../xmods2009.jpg 4TH USING THE RULER mark the length on the card board on both sides to create a rectangle(I know its a really crappy pic) http://i343.photobucket.com/albums/o.../xmods2010.jpg after you do this cut out only the rectangle DO NOT CUT ON THE INSIDE,CUT ONLY THE RECTANGLE!!! 5TH cut out a rec tangle 2 inches long (if this isn't right pm me and i will fix it) and fold the ends up http://i343.photobucket.com/albums/o.../xmods2011.jpg 6TH put the wheels on the axels and put them on the folds of the cardboard and mark how much room they take up . get anouther piece of cardboard and fit it to the mesurements u made,cut it ,and glue it to the piece. http://i343.photobucket.com/albums/o.../xmods2012.jpg then place the axels inside and glue the folded pieces to the cut piece http://i343.photobucket.com/albums/o.../xmods2013.jpg NOTE(WHEN U GLUE, PULL THE PIECES TIGHT . IF U DON'T THE WHELLS WILL WOBBLE AND SLIDE ) 7th cut 3 pieces as wide as the tralier and place them the same distance apart http://i343.photobucket.com/albums/o.../xmods2014.jpg 8TH cut a rectangle 2 inches long and drill a small hole in one side http://i343.photobucket.com/albums/o.../xmods2015.jpg 9TH cut 2 more pieces like the last one and make a y out of the 3 pieces and glue it to the frount of the tralier http://i343.photobucket.com/albums/o.../xmods2016.jpg 10TH glue the wheels to the bottem of the tralier http://i343.photobucket.com/albums/o.../xmods2017.jpg 11TH cut a rectangle as wide as the tralier as tall as u want for a rail . glue this right where the bed of the tralier stops http://i343.photobucket.com/albums/o.../xmods2018.jpg 12th using the straws cut them to the length of the axels while they ar still inside the part that holds them 13TH find the truck body u wish to use to pull the tralier. drill a hole in the bumper and find a longer screw for the hookup. http://i343.photobucket.com/albums/o.../xmods2019.jpg 14TH find a oblect to use as a "cap". I cut the piece from a gen 1 i scraped.the piece off of the knuckle i think or wat hooks on to da shocks but for u guys a lug nut would work good 15TH PAINT feel free to add on to ur tralier but nomadder wat u did u should end up with something like this: http://i343.photobucket.com/albums/o.../xmods2005.jpg :lol: |
wow! i like it! good job!
|
i can understand it im going to find some cardboard and try this:D
|
looks great but next time go to hobby lobby and by some balsa
|
i think if i do this i might use something other than cardboard...does it stay on the truck when moving full speed?
|
wonder will plastic work.. :D plastic might last longer for me :lol:
|
Very cool. I made my trailer out of bass wood, it's similar to balsa, but a lot more sturdy. Care if I post some pics?
|
the car stays when traviling but stoping is a problem=(. Go over and find the tut on how to make bungie cords and they work very well=) and xmodkidd33 put all the pics u got
|
|
nice, I'll Try and get my outher tralier up, but thats sweet
|
To me, I feel that a trailer is a large add-on. You have to have your muscle car or ricer to look nice on the trailor, becuase your not driving it. Also, to me, the trailor has to be able to go off-road, for those people that like to go offroad, so the trailor has to be in good order, and the car has to be in someway straped down.
It looks good. |
*cough* my ugly job on cardboard :D electric tape wins :D
http://i197.photobucket.com/albums/a...311640x480.jpg http://i197.photobucket.com/albums/a...312640x480.jpg http://i197.photobucket.com/albums/a...316640x480.jpg |
nice tralier ... I think? The first 2-story tralier but the black tape gives it a nice ... touch?
|
just to hold it in place a bit better.. lol too lazy to get glue :D
|
|
nice did u make that or did u by that
MY NEW TRALIER: ( drum roll please) http://i343.photobucket.com/albums/o...k/xmods001.jpg http://i343.photobucket.com/albums/o...k/xmods002.jpg http://i343.photobucket.com/albums/o...k/xmods003.jpg http://i343.photobucket.com/albums/o...k/xmods004.jpg |
prety nice now it says it free so can i have it and the mustang??
|
them are awsome, how long did it take all of yall to make them? and do the wheels roll good?
|
sweet those are nice trailers
|
I have a trailer coming from Galaxy limited its a tandem axel but i will have to modify my Titans bumper.........
|
All times are GMT -4. The time now is 10:23 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.